CR(I)(N)(E) ranges of multistage centrifugal pumps incorporating stainless steel impellers, intermediate chamber and outer sleeve. CR(E) versions have cast iron bases and pump heads coated with black cathodic paint. CRI(E) and CRN(E) versions have stainless steel bases and pumpheads. The pumps are available with the following shaft seals HQQ*, HUU*, HUB*, HQB*, where * can be E for EPDM and V for FKM. Maximum working pressures: CR1, 3 or 5 (2-36 stages) Oval flange: 16.0 bar. CR1, 3 or 5 (2-36 stages) DIN/ANSI/JIS flange: 25.0 bar CRI/N1, 3 or 5 (2-36 stages) Flexi clamp with oval flange connection: 16.0 bar CR/I/N1, 3 or 5 (2-36 stages) DIN/ANSI/JIS flange, PJE, Flexi clamp or Triclamp: 25.0 bar CR10 (1-16 stages) Oval flange or DIN/ANSI/JIS flange: 16.0 bar. CR10 (17-22 stages) DIN/ANSI/JIS flange: 25.0 bar. CRI10 (1-16 stages) PJE, Flexi clamp, Flexi clamp with oval connection, Triclamp or DIN/ANSI/JIS flange: 16.0 bar. CRI10 (17-22 stages) PJE, Flexi clamp, Triclamp or DIN/ANSI/JIS flange: 25.0 bar CRN10 (1-22 stages) PJE, Flexi clamp, Flexi clamp with oval connection, Triclamp or DIN/ANSI/JIS flange: 25.0 bar. CR15 or 20 (1-7 stages) Oval flange: 10.0 bar. CR15 or 20 (1-10 stages) DIN/ANSI/JIS flange: 16.0 bar. CR15 or 20 (11-17 stages) DIN/ANSI/JIS flange: 25.0 bar. CRI15 or 20 (1-7 stages) Flexi clamp with oval flange connection: 10.0 bar CRI15 or 20 (1-10 stages) PJE, Flexi clamp, Triclamp or DIN/ANSI/JIS flange: 16.0 bar. CRI15 or 20 (11-17 stages) PJE, Flexi clamp, Triclamp or DIN/ANSI/JIS flange: 25.0 bar. CRN15 or 20 (1-17 stages) PJE, Flexi clamp, Flexi clamp with oval connection, Triclamp or DIN/ANSI/JIS flange: 25.0 bar. CR models: Cold water use only. CRI/CRN models: Cold water use only and from April 2023 99°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2210906

Size:

Oval flange: Rp 1” - 2”. Flexi Clamp Base: Small Base (CR/I/N1/1(s)/3/5) Ø32, Medium Base (CR/I/N15/20) Ø50. Triclamp Base Small Base (CR/I/N1/1(s)/3/5) DN32, Medium Base (CR/I/N15/20) DN50. Flange Base: Small Base (CR/I/N1/1(s)/3/5) DN25/32, Medium Base (CR/I/N15/20) DN40 and 50. PJE Base: Small Base (CR/I/N1/1(s)/3/5) DN32, Medium Base (CR/I/N15/20) DN50.

Marking:

Grundfos and Grundfos logo, type, Model, Product/Version no., technical info, temperature (WRAS 23C or WRAS 99C), manufacturing country on data plate on motor stool.

Installation Requirements:

R001 R415

Expiry date:

31/10/2027

Model:

CR(I)(N)(E) 1(s) range with 2-36 stages, CR(I)(N)(E) 3 range with 2-36 stages, CR(I)(N)(E) 5 range with 2-36 stages, CR(I)(N)(E) 10 range with 1-22 stages, CR(I)(N)(E) 15 range with 1-17 stages, CR(I)(N)(E) 20 range with 1-17 stages. Model keycode: CR(E)(C) 1/1(s)/3/5/10/15/20-A B-C-D-E-XXXE, CRI(E)(C) 1/1(s)/3/5/10/15/20-A B-C-D-E-XXXE, CRN(E)(C) 1/1(s)/3/5/10/15/20-A B-C-D-E-XXXE. Where: CR = Pump type and Cast Iron, I = EN 1.4301, N = EN 1.4401, E = Preminum Electronically Controlled Motor, C = Core (Basic) with Electronically Controlled Motor. 1/3/5/10/15/20 = Flow rate [m³/h], (s) = Reduced impeller version. A = No. of stages. B = Code for pump version: A = Basic version, B = Oversize motor, E = Pump with certificate, G = E-pump without operating panel, H = Horizontal version, I = Different pressure rating, J = E-pump with a different maximum speed, L = Pump including Grundfos CUE and certificate, N = With sensor, O = Clean and dryed, P = Undersize motor, R = Belt driven pump, V = Cascade function, X = Special version*, Z = Pump with bearing flange. C = Code for pipe connection: A = Oval flange, CA = Flexi clamp, CX = TriClamp, F = DIN flange, G = ANSI flange, J = JIS flange, N = Changed diameter of ports, P = PJE coupling (Victaulic). D = Code for materials: A = Basic version, C = Carbon-free pump, D = Carbon-graphite filled PTFE (bearings)/tungsten carbide, H = Flanges and base plate EN 1.4408, L = Motor stool, base plate and flanges EN 1.4408, N = Flanges EN 1.4408, R = Silicone carbide /silicone carbide bearing, S = PTFE neck rings, T = Baseplate EN 1.4408, X = Special*. E = Code for rubber parts: E = EPDM, V = Viton. XXX = Code for shaft seal: HQQ, HUU, HUB, HQB. [H = Balanced cartridge seal with O-ring, B = Carbon, synthetic resin-impregnated, U = Cemented tungsten carbide, Q = Silicon carbide]. *Special version ONLY covers the situation where more than 4 options are selected within the same position. This will automatically turn the 4 or more options into an X.

Product Images

Approval Holder:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7, DK-8850 Bjerringbro

Phone

+45 24610542

View All Listings by this Company

CR(N)(E) ranges of vertical multistage centrifugal pumps with stainless steel (CRN models) or black polymer coated cast iron bodies (CR models) and a stainless steel impeller. The products are available with or without a sensor. Maximum working pressure: 16.0 bar - CR(N)(E) 32 range with 1-7 stages, CR(N)(E) 45 range with 1-5 stages, CR(N)(E) 64 range with 1-5 stages. 30.0 bar - CR(N)(E) 32 range with 8-14 stages, CR(N)(E) 45 range with 6-11 stages, CR(N)(E) 64 range with 6-8 stages. 33.0 bar - CR(N)(E) 45 range with 12-13 stages. Maximum operating temperature - CR models are cold water use only. CRN models are cold water use only up to February 2nd 2023, and 99°C from February 3rd 2023.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2301900

Size:

CR/CRN 32: CR/CRN 32, 1-14 stages: DN65 and DN80 flange connection. CRN32, 1-14 stages: 3” PJE connection CR/CRN 45: CR/CRN 45, 1-13 stages: DN80 and DN100 flange connection. CRN45, 1-13 stages: 4” PJE connection. CR/CRN 64: CR/CRN 64, 1-8 stages: DN100 flange connection. CRN64, 1-8 stages: 4” PJE connection.

Marking:

Grundfos and Grundfos logo, model, type, prod/version no., technical information and manufacturing country on data plate on motor stool.

Installation Requirements:

R001 R415

Expiry date:

31/01/2028

Model:

CR/CRN(E) 32-A-B C-D-E-F-XXXX, CR/CRN(E) 45-A-B C-D-E-F-XXXX, CR/CRN(E) 64-A-B C-D-E-F-XXXX. Where: Type range: CR = Pump type and Cast Iron, N = EN 1.4401, E = Preminum Electronically Controlled Motor. 32, 45 or 64 = flow rate m³/h, A = number of impellers (CR/CRN 32 1-14, CR/CRN 45 1-13, CR/CRN 64 1-8). B = number of reduced impellers: 0, 1 or 2 on CR/CRN 32 1-7, CR/CRN 45 1-5, CR/CRN 64 1-8 models, 0 or 2 on all other models. C = Code for pump version: A = Basic version, B = Oversize motor, E = Pump with certificate, G = E-pump without operating panel, H = Horizontal version, I = Different pressure rating, J = E-pump with a different maximum speed, K = Pump with low NPSH, L = Pump including Grundfos CUE and certificate, N = With sensor, O = Clean and dryed, P = Undersize motor, R = Belt driven pump, V = Cascade function, X = Special version*, Z = Pump with bearing flange, D = Code for pipe connection: F = DIN flange, G = ANSI flange, J = JIS flange, N = Changed diameter of ports, P = PJE coupling (Victaulic). E = Code for materials: A = Basic version, C = Carbon-free pump, D = Carbon-graphite filled PTFE (bearings)/tungsten carbide, H = Flanges and base plate EN 1.4408, L = Motor stool, base plate and flanges EN 1.4408, N = Flanges EN 1.4408, R = Silicone carbide /silicone carbide bearing, S = PTFE neck rings, T = Baseplate EN 1.4408, X = Special*. F = Code for rubber parts: E = EPDM, V = Viton. XXXX = Code for shaft seal: HQQE or V / HUUE or V / HUBE or V /HQBE or V. H = Balanced cartridge seal with O-ring, B = Carbon, synthetic resin-impregnated, U = Cemented tungsten carbide, Q = Silicon carbide, E = EPDM, V = Viton. *Special version ONLY covers the situation where more than 4 options are selected within the same position. This will automatically turn the 4 or more options into an X.

Product Images

Approval Holder:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7, DK-8850 Bjerringbro

Phone

+45 24610542

View All Listings by this Company

‘UPM4’ range of circulator pumps with either a composite (plastic) or stainless-steel body, plastic impellor and EPDM ‘O’-rings. The 1”-1½” models are supplied with EPDM gaskets for the inlet and outlet. The 2” model has fibre/NBR gaskets. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2211908

Size:

Composite (CIL3) model: 1” BSP (M) inlet/outlet, Stainless steel (N) models: 1” BSP (M) inlet/outlet, 1½” BSP (M) inlet/outlet, 2” BSP (M) inlet/outlet.

Marking:

Grundfos, Grundfos logo and model type key on top of motor housing. Grundfos Holdings A/S, part no., serial no. and date of production (PC code = PC: YYWWxxx) on side of motor housing. Flow arrow on body.

Installation Requirements:

R001 R008 R415

Expiry date:

30/11/2027

Model:

UPM4/UPM4L A BBB CC-DD E EEE F GGG Where: UPM4 - pump series type - standard, UPM4L - pump series type - large (motor) version with extended P1. A = K - for condensing environments. BBB = Control variant - PWM or LIN bus. CC = Nominal diameter - 15 = G1”, 25 = G1½”, 32 = G2”. DD = Maximum head, value divided by 10 = head in m, e.g. 20 = 2.0m. Can be 20, 30, 40, 45, 50, 55, 60, 65, 70 or 75. E EEE = Pump housing and port length. N 130 and N 180 = Stainless steel and 130 or 180mm port length. CIL3PP = Composite (plastic), which is only available as 130mm port length, so no value Is mentioned. F = Control box orientation. Can be 3, 6, 9, or 12. GGG = Customer code. Can be any combination or letters and numbers.

Product Images

Approval Holder:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7, DK-8850 Bjerringbro

Phone

+45 24610542

View All Listings by this Company

‘Homebooster’ pump with stainless steel body, plastic impeller and EPDM rubber ‘O’-rings. The product is supplied with two loose brass ¾” captive nut x ½” BSP (M) connectors and fibre gaskets for installation on the inlet and outlet. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2301901

Size:

¾” BSP (M) inlet x outlet (to pump). ½” BSP (M) inlet x outlet (to optional brass connectors).

Marking:

Grundfos and Grundfos logo, type, Product no. and technical info on adhesive label on motor housing. Flow arrow on body.

Installation Requirements:

R001 R415

Expiry date:

31/01/2028

Model:

UPA 15-90 N 160 Homebooster.

Product Images

Approval Holder:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7, DK-8850 Bjerringbro

Phone

+45 24610542

View All Listings by this Company

Range of circulator pumps with brass bodies, plastic impellor, and EPDM ‘O’-rings and seals. The COMFORT 15-14 BX prefix models incorporate a screwdriver operated isolation valve on the inlet and a non-return valve at the outlet. These are housed within 1” BSP (M) x ½” BSP (M) adaptors. Maximum working pressure 10.0 Bar

Non-metallic materials and components comply with BS6920 at 95°C

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2304909

Size:

COMFORT 15-14 B prefix models: ½” BSP (F). COMFORT 15-14 BX prefix models: 1” BSP (M).

Marking:

Grundfos on body. Model on adhesive label on body. Flow arrow on the isolation valve.

Installation Requirements:

R001

Expiry date:

30/04/2028

Model:

COMFORT 15-14 B PM, COMFORT 15-14 BA PM, COMFORT 15-14 BDT PM, COMFORT 15-14 BX PM, COMFORT 15-14 BXA PM, COMFORT 15-14 BXDT PM.

Approval Holder:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7, DK-8850 Bjerringbro

Phone

+45 24610542

View All Listings by this Company

Single stage centrifugal pump, with plastic impellers. The pump is equipped with ceramic bearings; the body and shaft are made of stainless steel. The product is supplied with loose fibre/NBR inlet/outlet gaskets. Maximum working pressure 10.0 bar. Maximum operating temperature 99°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2311900

Size:

2” BSP (M) inlet/outlet

Marking:

Grundfos and Grundfos logo, type, model, production number, technical info and manufacturing country on data plate on top of motor housing. Flow arrow on body.

Installation Requirements:

R001 R415

Expiry date:

30/11/2028

Model:

UPS 32 -100 N 180

Approval Holder:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7, DK-8850 Bjerringbro

Phone

+45 24610542

View All Listings by this Company

Range of circulator pumps with stainless steel bodies and a plastic impeller. All models are available with a plastic (composite) rotor can, the MAGNA1 range is also available with a stainless-steel rotor can in the DN32 flanged, threaded 1½ & 2” sizes only. The MAGMA3 models have a differential pressure sensor. Maximum working pressure 10.0 bar. Maximum operating temperature 99°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2305910

Size:

Flanged: DN32, DN40, DN50, DN65. Threaded: 1 ½” & 2” BSP (M).

Marking:

Grundfos and Grundfos logo on motor housing. Grundfos Holdings A/S and address, type, model, Product No., Serial No., production date (YYWW), manufacturing country and other technical information on data plate on motor control box.

Installation Requirements:

R001

Expiry date:

31/05/2028

Model:

MAGNA1 XX1-XX2 N XXX3, MAGNA1 XX1-XX2 F N XXX3, MAGNA3 XX1-XX2 N XXX3, MAGNA3 XX1-XX2 F N XXX3. Where: MAGNA1 = pump type (without sensor), MAGNA3 = pump type (with differential pressure sensor). XX1 = Nominal diameter (DN) of inlet/outlet ports (mm). XX2 = Max. head (dm). Blank or F = Blank - threaded, F - Flanged connection. N = Stainless steel pump housing. XXX3 = Port to port length (mm). Full model list below: MAGNA3 32-120 F N 220, MAGNA3 40-80 F N 220, MAGNA3 40-100 F N 220, MAGNA3 40-120 F N 250, MAGNA3 40-150 F N 250, MAGNA3 40-180 F N 250, MAGNA3 50-40 F N 240, MAGNA3 50-60 F N 240, MAGNA3 50-80 F N 240, MAGNA3 50-100 F N 280, MAGNA3 50-120 F N 280, MAGNA3 50-150 F N 280, MAGNA3 50-180 F N 280, MAGNA3 65-40 F N 340, MAGNA3 65-60 F N 340, MAGNA3 65-80 F N 340, MAGNA3 65-100 F N 340, MAGNA3 65-120 F N 340, MAGNA3 65-150 F N 340, MAGNA1 25-40 N 180, MAGNA1 25-60 N 180, MAGNA1 25-80 N 180, MAGNA1 25-100 N 180, MAGNA1 25-120 N 180, MAGNA1 32-40 N 180, MAGNA1 32-60 N 180, MAGNA1 32-80 N 180, MAGNA1 32-100 N 180, MAGNA1 32-40 F N 220, MAGNA1 32-60 F N 220, MAGNA1 32-80 F N 220, MAGNA1 32-100 F N 220, MAGNA1 32-120 F N 220, MAGNA1 40-40 F N 220, MAGNA1 40-60 F N 220, MAGNA1 40-80 F N 220, MAGNA1 40-100 F N 220, MAGNA1 40-120 F N 250, MAGNA1 40-150 F N 250, MAGNA1 40-180 F N 250, MAGNA1 50-40 F N 240, MAGNA1 50-60 F N 240, MAGNA1 50-80 F N 240, MAGNA1 50-100 F N 280, MAGNA1 50-120 F N 280, MAGNA1 50-150 F N 280, MAGNA1 50-180 F N 280, MAGNA1 65-40 F N 340, MAGNA1 65-60 F N 340, MAGNA1 65-80 F N 340, MAGNA1 65-100 F N 340, MAGNA1 65-120 F N 340, MAGNA1 65-150 F N 340, MAGNA3 25-40 N 180, MAGNA3 25-60 N 180, MAGNA3 25-80 N 180, MAGNA3 25-100 N 180, MAGNA3 25-120 N 180, MAGNA3 32-40 N 180, MAGNA3 32-60 N 180, MAGNA3 32-80 N 180, MAGNA3 32-100 N 180, MAGNA3 32-40 F N 220, MAGNA3 32-60 F N 220, MAGNA3 32-80 F N 220, MAGNA3 32-100 F N 220, MAGNA3 40-40 F N 220, MAGNA3 40-60 F N 220, MAGNA1 32-120 N 180, MAGNA3 32-120 N 180.

Approval Holder:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7, DK-8850 Bjerringbro

Phone

+45 24610542

View All Listings by this Company

Range of pressure, flow and temperature sensors. The VFI sensors have stainless steel bodies, all other models have plastic bodied sensors. The MFS and VFS models are supplied with a plastic (composite) or stainless-steel flow pipe. The VFI models are supplied with a stainless-steel flow pipe. The products can also be supplied with a range of fittings/end connections (see model and size). Maximum working pressures: ITS, LPS, RPS, MFS (composite flow pipe) and VFS (composite flow pipe) models: 24.0 bar. DPS: Models with vent hole: 16.0 bar. All other models: 24.0 bar. MFS (stainless steel flow pipe) and MFS (stainless steel flow pipe): 30.0 bar. VFI non-flanged models: 30.0 bar. VFI flanged models: 30.0 bar or as per flange PN rating 16.0 bar or 25.0 bar (whichever is lower). Maximum operating temperature 99°C.

Section:

1530 Miscellaneous Fittings

Size:

ITS/LPS/RPS: BRASS CW 617N: ¼" BSPP (M). S/S EN 14408: ½" BSPT (M). ½" BSPT (M) (short). ½" NPT (M). Plastic: ⅜" BSPP (M). DPS: BRASS CW 617N: ½" BSPT (M) w/vent hole. 15.5mm w/vent hole. S/S EN 1.4401: ½" BSPT (M) w/vent hole. Housing only S/S (EN 1.4408): 2x ⅛" NPT (F). End connections for housing only: AISI 316 6mm compression, 6mm and 8mm tube. MFS, VFS (COMPOSITE FLOWPIPE): FLOWPIPE ONLY: 1”, 1¼”, 1½” BSPP (M). END CONECTIONS: BRASS CW 617N: ½", ¾" BSPP (M). ¾", 1", 1¼" BSPT (M). ½", ¾", 1", 22mm, 28mm SWEAT. S/S EN 1.4401: ¾", 1", 1¼" NPT (M). 1", 1¼" BSPT (M). MFS, VFS (S/STEEL FLOWPIPE): FLOWPIPE ONLY (EN 1.4408): ¾", 1", 1¼" BSPP (M). ¾", 1", 1¼" NPSM (M). 1" FLANGE. END CONNECTIONS: BRASS CW 617N: ½", ¾", 1" BSPT (M). ¾", 1", 22mm & 28mm SWEAT. S/S EN 1.4401: ¾", 1" BSPT (M). ¾", 1" NPT (M). VFI: CAST IRON OR S/STEEL EN 1.4408 FLANGED: DN18/25/32 (1¼"). DN40/50 (2"). DN65/80/100. S/S EN 1.4401: 1”, 1¼" BSPT (M). 1, 1¼" NPT (M).

Marking:

VFI models: Grundfos and model type (VFI) on adhesive label on sensor. Grundfos on flow pipe. All other models: Grundfos on top of sensor housing. Model type (ITS/LPS/RPS/MFS/VFS) on adhesive label on sensor.

Installation Requirements:

R001

Expiry date:

31/05/2028

Model:

ITS LPS or RPS sensor alone (only for internal sale): Sensor/ AAA/ B.B-BBB B/ C/ D/ E E.EE EE/ FFF ITS, LPS or RPS with or without accessories (saleable): AAA/ B.B-BBB B/ C/ D/ E E.EE EE/ FFF/ GG/ HHH/ IIII Product: [A] Must be ITS, LPS or RPS Range and unit: [B] Of no importance for drinking water* Gen.: [C] Of no importance for drinking water* Output: [D] Of no importance for drinking water* Cable: [E] Of no importance for drinking water* Sealing: [F] The first character must be E, second and third character have no importance for drinking water* Materials: [G] Must be either -B, -S, -I or -- Connection: [H] Must be either 03A, 03B, 03N, 02P, 10K, 16P or --- Packaging: [I] Of no importance for drinking water* ------ DPS sensor alone (only for internal sale): Sensor/ AAA/ B.B-BBB B/ C/ D/ E E.EE EE/ FFF DPS with or without accessories (saleable): AAA/ B.B-BBB B/ C/ D/ E E.EE EE/ FFF/ GG/ HHH/ IIII Product: [A] Must be DPS Range and unit: [B] Of no importance for drinking water* Gen.: [C] All characters allowed except 4 and 5 Output: [D] Of no importance for drinking water* Cable: [E] Of no importance for drinking water* Sealing: [F] The first character must be E, the second must not be A. The third character has no importance for drinking water* character have no importance for drinking water* Materials: [G] Must be either -B, -S or -- Connection: [H] Must be either 06C, 06T, 08T, 10L, 24N, 63B, 64S or --- Packaging: [I] Of no importance for drinking water* ------ MFS or VFS sensor alone (only for internal sale): Sensor/ AAA/ B.B-BBB B/ C/ D/ E E.EE EE/ FFF MFS or VFS with or without composite flow pipe accessories (saleable): AAA/ B.B-BBB B/ C/ D/ E E.EE EE/ FFF/ GG/ HHH/ IIII Product: [A] Must be MFS or VFS Range and unit: [B] Of no importance for drinking water* Gen.: [C] Of no importance for drinking water* Output: [D] Of no importance for drinking water* Cable: [E] Of no importance for drinking water* Sealing: [F] The first character must be A or E, second and third character have no importance for drinking water* Materials: [G] Must be either CB, CS or -- Connection: [H] Must be either 03P, 03S, 04B, 04N, 04P, 04S, 05B, 05N, 05P, 05S, 07B, 07N, 07P, 09P, 10K, 15K, 18K, 22S, 28S or --- Packaging: [I] Of no importance for drinking water* ------ MFS or VFS sensor alone (only for internal sale): Sensor/ AAA/ B.B-BBB B/ C/ D/ E E.EE EE/ FFF MFS or VFS with or without stainless steel flow pipe accessories (saleable): AAA/ B.B-BBB B/ C/ D/ E E.EE EE/ FFF/ GG/ HHH/ IIII Product: [A] Must be MFS or VFS Range and unit: [B] Of no importance for drinking water* Gen.: [C] Of no importance for drinking water* Output: [D] Of no importance for drinking water* Cable: [E] Of no importance for drinking water* Sealing: [F] The first character must be A or E, second and third character have no importance for drinking water* Materials: [G] Must be either QB, QS, Q- or -- Connection: [H] Must be either 03B, 04B, 04M, 04N, 04P, 04S, 05B, 05M, 05N, 05P, 05S, 07M, 07P, 10K, 10L, 102, 22S, 28S, 51G or --- Packaging: [I] Of no importance for drinking water* ------ VFI sensor alone (only for internal sale): Sensor/ AAA/ B.B-BBB B/ C/ D/ E E.EE EE/ FFF VFI with or without accessories (saleable): AAA/ B.B-BBB B/ C/ D/ E E.EE EE/ FFF/ GG/ HHH/ IIII Product: [A] Must be VFI Range and unit: [B] Of no importance for drinking water* Gen.: [C] Of no importance for drinking water* Output: [D] Of no importance for drinking water* Cable: [E] Of no importance for drinking water* Sealing: [F] The first character must be E, second and third character have no importance for drinking water* Materials: [G] Must be either S-, SG or SS Connection: [H] Must be either 05B, 05N, 07B, 07N, 30F, 31F, 32F, 33F, 35F, 37F or 42F Packaging: [I] Of no importance for drinking water* ------ Where: Code for sealing [F]: 1st character: “A” means EPDM O-rings and EPDM sealing sleeve. “E” means EPDM O-rings. Code for material [G]: 1st character: “C” means composite flow pipe. “Q” means flow insert and (except service sets) also a stainless steel flow pipe. “S” means stainless steel adapter (for DPS) or flow pipe. “-“ means no adapter (for DPS) or flow pipe. 2nd character: "B" means brass (fitting). “G” means cast iron (flange). “I” means composite (fitting). "S" - means stainless steel (fitting or flange). “-“ means no further accessories included. Code for connection (H): 1st two characters: “02” means ¼”. “03” means ½”. “04” means ¾”. “05” means 1”. “06” means 6 mm. “07” means 1¼”. “08” means 8 mm. “09” means 1½”. (Internal note - this is on a flow pipe connection) “15” means 15 mm. “16” means ⅜”. “18” means 18 mm. “22” means 22 mm. “24” means ⅛”. “28” means 28 mm. “30” means DIN PN25/40 DN18/25/32, ANSI B16.5 Class 300 - 1¼". “31” means DIN PN16/25/40 DN40, ANSI B16.5 Class 300 - 2". “32” means DIN PN16/25/40 DN50, ANSI B16.5 Class 300 - 2". “33” means ISO/DIN PN25/40 DN65. “35” means ISO/DIN PN25/40 DN80. “37” means ISO/DIN PN16 DN100. “42” means ISO/DIN PN25/40 DN100. “51” means 1" / ¾". “63” means ½" and ventilation opening. “64” means 15.5 mm and ventilation opening. “--” means no accessories included and thus implicitly the dimension of the sensor connection, which for DPS, ITS, LPS, MFS, RPS and VFS is 10 mm (of no importance for drinking water). 3rd character: “A” means BSPT (short). “B” means BSPT. “C” means Compression. “F” means flange. “K” means standard clip included (of no importance for drinking water). “L” means special clip included (of no importance for drinking water). “M” means NPSM. “N” means NPT. “P” means BSPP. “R” means union not (union nut include but no fittings included). “S” means sweat. “T” means hose connector. “2” means both standard clip and special clip included (of no importance for drinking water). “-“means no accessories included and thus implicitly the connection type of the sensor, which for DPS, ITS, LPS, MFS, RPS and VFS is a clip (of no importance for drinking water). Further details on the nomenclature: * All characters are allowed NOTE - For customer-specific numbers, GG/HHH/IIII in the saleable code is replaced by the customer name. However, the customer-specific products are still covered if they meet the requirements specified in the standard sales code.

Approval Holder:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7, DK-8850 Bjerringbro

Phone

+45 24610542

View All Listings by this Company

CMBE range of horizontal multistage centrifugal booster pumps with stainless steel bodies and impellers and EPDM ‘O’-rings. All models include an expansion vessel, non-return valve, pressure gauge and sensor on the outlet. Maximum working pressure 10.0 bar. Cold water use only.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2306903

Size:

CMBE1 & CMBE3: 1” BSPT (F) Inlet/Outlet. CMBE5: 1 ¼” BSPT (F) Inlet/1” BSPT (F) Outlet. CMBE10: 1 ½” BSPT (F) Inlet/Outlet.

Marking:

Grundfos and Grundfos logo, type, Model, P/N no. and technical info on adhesive label on end of motor housing.

Installation Requirements:

R001 R040

Expiry date:

30/06/2028

Model:

CMBE-XX1-XX2-I-U-C-X3-D-X4 Where: CMBE = Booster type - booster with integrated frequency inverter. XX1 = Rated flow rate [m³/h] @ 50Hz - 1, 3, 5 or 10. XX2 = Maximum head [m] - 44, 54, 62 or 93 (CMBE 1 = 44, CMBE 3 = 62 or 93, CMBE 5 = 62, CMBE 10 = 54). I = Materials in contact with liquid - Sleeve, Pump shaft, Impellers/chamber, 5-way valve: EN1.4301/AISI 304, Pressure manager: PP 30GF, Pressure tank: EPDM/steel/PP/Butyl. U = Supply Voltage [V] - 1 x 200-240 V, 50/60 Hz. C = Motor - High-efficiency motor with frequency converter (IP55). X3 = Main cable and plug options - A/B/C/D/E/H/G/J/O. D = Controller - Integrated frequency converter. X4 = Thread - A: Rp 1, B: Rp 1 1/4 or C: Rp 1 1/2.

Approval Holder:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7, DK-8850 Bjerringbro

Phone

+45 24610542

View All Listings by this Company

‘AQ tap’ water dispensing unit incorporating a brass solenoid and a flow sensor. The unit is operated using a smart card and credit system that allows the user to obtain a set amount of water. Maximum working pressure 3.0 bar. Cold water use only.

Section:

1530 Miscellaneous Fittings

Size:

½” BSP (M) inlet/outlet.

Marking:

Grundfos and Grundfos logo on front panel. Grundfos logo, type, model, Product no. and technical information on data plate on left hand side of cabinet.

Installation Requirements:

R001 R040

Expiry date:

30/06/2028

Model:

AQT-AA-ST-1.

Approval Holder:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7, DK-8850 Bjerringbro

Phone

+45 24610542

View All Listings by this Company