TEST SITE

Grundfos Holding A/S Approvals

#2011907

CM(E)(C) range of electronically operated pumps available in stainless steel, (‘EN 1.4301/AISI304’ or ‘EN 1.4401 /AISI316’) and cast iron. (CMEC models were added October 2023). The pumps are supplied with Sic-Sic mechanical shaft seals and FKM or EPDM seals. Cast iron models: Maximum working pressure 10.0 bar. Cold water use only. Stainless steel models: Maximum working pressure 16.0 bar. Maximum operating temperature 60°C for self-priming models, 99°C for all other models.

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
2011907
Size:
1” - 2” BSP (F) or NPT inlet and outlet.
Marking:
Grundfos and Grundfos logo, type, model and technical information on adhesive label either on the terminal box or fan cover.
Installation Requirements:
R001 R415
Expiry date:
30/11/2025
Model:
CM(E)(C)1, CM(E)(C)3 and CM(E)(C)5: CM(E)(C)1, cast iron / AISI304 2 – 8 stages. CM(E)(C)3, cast iron / AISI304 2 – 8 stages. CM(E)(C)5, cast iron / AISI304 2 – 8 stages. CM(E)(C)1, AISI316 2 - 14 stages. CM(E)(C)3, AISI316 2 - 14 stages. CM(E)(C)5, AISI316 2 - 13 stages. CM(E)(C)10 CM(E)(C)15 and CM(E)(C)25: CM(E)(C)10, cast iron / AISI304 1 – 5 stages. CM(E)(C)15, cast iron / AISI304 1 – 4 stages. CM(E)(C)25, cast iron / AISI304 1 – 4 stages. CM(E)(C)10, AISI316 1 – 8 stages. CM(E)(C)15, AISI316 1 – 4 stages. CM(E)(C)25, AISI316 1 – 4 stages. Self-priming models: CM(E)1, AISI316 3 – 6 stages (S or O) CM(E)3, AISI316 3 – 6 stages (S or O) CM(E)5, AISI316 3 – 7 stages (S or O) Model key: CM/CME/CMEC X1-X2 X3 X4-X5-X6-X7-X8 X9 X10 X11 X11-X12-X13-X14 Where: CM = Centrifugal Modular. CME = Centrifugal Modular with integrated frequency converter. CMEC = Centrifugal Modular with integrated frequency converter and only core functions of the motor unit. (NOTE: CMEC models were added October 2023). X1 = Rated flow rate at 50 Hz (m³/h): 1-25. X2 = Number of impellers: 1-14. X3 = Pump Versions: A - Basic Version. E: Pumps with certificates/approvals. O: Self-priming version (maximum suction lift 8 metres). S: Self-priming version (maximum suction lift 4 metres). X4 = Pipe connection: R: Rp (ISO 7/1). S: Internal Npt thread. X5 = Material in contact with pump media: A: inlets and outlets parts EN-GJL-200, Pump shaft + Impellers and chambers EN 1.4301/AISI 304. G: Sleeve, Pump shaft + Impellers and chambers EN 1.4401/AISI 316. I: Sleeve, Pump shaft + Impellers and chambers EN 1.4301/AISI 304. X6 = Rubber parts in pump (excluding neck ring and shaft seal): E: EPDM. V: FKM. X7 = Shaft seal: A: O-ring seal with fixed driver. X8 = Material of rotating seal face: Q: Silicon Carbide (SIC). X9 = Material of stationary seal face: Q: Silicon Carbide (SIC). X10 =Material of secondary seal: E: EPDM. V: FKM. X11 = Supply voltage: B/B1/C/D/E/E1/F/G/H/I/J/O/S/T/U/V/X. X12 = Motor information: A/B/C/D/EF/G/H/I/J. X13 = Mains plug: A/B/C/D. X14 = Sensor: N: No sensor. Example: CM 10-3 A-R-I-E-A Q Q E C-A-A-N
Product Images
Approval Holder:
Grundfos Holding A/S
Company Name
Grundfos Holding A/S
Address
Poul Due Jensens Vej 7, DK-8850 Bjerringbro
Phone
+45 24610542

View All Listings by this Company

Print This Approval

#2011908

Stainless steel bodied sensor with EPDM ‘O’-ring. Maximum operating temperature 90°C.

Section:
1530 Miscellaneous Fittings
Size:
½” BSP (M)
Marking:
Grundfos and Grundfos logo, part no. (P/N) and serial no. (S/N) on body.
Installation Requirements:
R001
Expiry date:
30/11/2025
Model:
VTU (model code: 99470445), Model added July 2022: VTU (model code: 92556499).
Product Images
Approval Holder:
Grundfos Holding A/S
Company Name
Grundfos Holding A/S
Address
Poul Due Jensens Vej 7, DK-8850 Bjerringbro
Phone
+45 24610542

View All Listings by this Company

Print This Approval

#2012924

Range of circulating pumps, with plastic or stainless steel bodies (cast EN 1.4308 or plate EN 1.4301) and a plastic impeller. Maximum working pressure 10.0 bar (stainless steel bodied pumps), 3.0 bar (plastic bodied pumps). Maximum operating temperature 95°C.

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
2012924
Size:
Composite (plastic body) (15 models): 1” BSP (M). Stainless steel body (25 models): 1½” BSP (M).
Marking:
Grundfos and Grundfos logo, type, model, production no. and other technical info on adhesive label on end of motor housing. Flow arrow on body.
Installation Requirements:
R001 R008
Expiry date:
31/12/2025
Model:
Composite (plastic body): UPM2 15-** CIL2. Stainless steel body: UPMM 25-** N 180. UPML 25-** N 180. UPMXL 25-** 180 N. UPM GEO 25-** N 180. UPML GEO 25-** 180 N. UPMXL GEO 25-** 180 N. SOLAR PML 25-** 180 N. ** -stands for the lifting height of the pump in dm, that can be various 2 or 3 digit numbers
Product Images
Approval Holder:
Grundfos Holding A/S
Company Name
Grundfos Holding A/S
Address
Poul Due Jensens Vej 7, DK-8850 Bjerringbro
Phone
+45 24610542

View All Listings by this Company

Print This Approval

#2012925

Range of single stage circulating pumps with plastic impellers and stainless steel housing, (red or black external coating, and from July 2023 a yellow external coating on the 1½" model with 130mm port length). From December 2023 the UPS25 prefix models can be supplied with EPDM inlet/outlet gaskets and the UPS32 prefix models can be supplied with fibre/NBR inlet/outlet gaskets. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C (s/steel plate EN 1.4301/1.4401 models) or 99°C (s/steel cast EN 1.4308 models).

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
2012925
Size:
1¼” BSP (M) inlet/outlet (EN 1.4301 plate steel) - 150mm port length. 1½”-2” BSP (M) inlet/outlet (EN 1.4308 cast steel) - 180mm port length. DN40 flanged inlet/outlet (EN 1.4308 cast steel) - 250mm port length. Sizes added July 2023: 1¼” BSP (M) inlet/outlet (EN 1.4401 plate steel) - 150mm port length. 1¼” BSP (M) inlet/outlet (EN 1.4308 cast steel) - 150mm port length. 1½” BSP (M) inlet/outlet (EN 1.4308 cast steel) - 130mm port length.
Marking:
Grundfos, Grundfos logo, type, model, Production no., manufacturing country and other technical information on data plate on top of motor.
Installation Requirements:
R001
Expiry date:
31/12/2025
Model:
UP(S) XX-XX N XXX. UP(S) XX-XX FN XXX. Where: UP = Range name. S = Pumps equipped with electronic speed control. 1st XX = Nominal diameter (DN) of suction and discharge ports (mm) - Threaded models: 20 (1¼”), 25 (1½”) or 32 (2”). Flanged model: 40. 2nd XX = Maximum Head (dm). (no letter) or F = connection type: no letter - threaded, F - flanged. N = Pump housing - Stainless Steel. XXX = Port length (mm) - 1¼": 150, 1½": 130 or 180, 2": 180, DN40: 250.
Product Images
Approval Holder:
Grundfos Holding A/S
Company Name
Grundfos Holding A/S
Address
Poul Due Jensens Vej 7, DK-8850 Bjerringbro
Phone
+45 24610542

View All Listings by this Company

Print This Approval

#2012926

Range of single stage centrifugal pumps with bronze housings or plastic housings (see model) and plastic impellers. Maximum working pressure 6.0 bar (UP(S)(O) 15-XX CES87 130 model only), 10.0 bar (all other models). Maximum operating temperature 95°C.

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
2012926
Size:
1” BSP (M) inlet/outlet.
Marking:
Grundfos, Grundfos logo, type, model, production no. and other technical information on data plate on top of motor. Flow arrow on body.
Installation Requirements:
R001 R008
Expiry date:
31/12/2025
Model:
Bronze pump housing: UP(S)(O) 15-XX B 130 (GFSxx). SOLAR 15-XX B 130 (GFSxx). Plastic (composite) pump housing: UP(S)(O) 15-XX CIL2 (GFSxx). SOLAR 15-XX CIL2 (GFSxx). UP(S)(O) 15-XX CES87 (GFSxx). Where: UP or SOLAR = Range name. S = Pumps equipped with electronic speed control. O = High efficiency pump. 15 = 1” BSP connections. XX = Maximum Head (dm). B = Pump housing - Bronze. CES87 or CIL2 = Pump housing - Composite. 130 (where noted) = Port length (mm).
Product Images
Approval Holder:
Grundfos Holding A/S
Company Name
Grundfos Holding A/S
Address
Poul Due Jensens Vej 7, DK-8850 Bjerringbro
Phone
+45 24610542

View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page 1 of 5

© WRAS 2025 | Update Cookie Consent

Site Developed By Duo

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.