CM(E)(C) range of electronically operated pumps available in stainless steel, (‘EN 1.4301/AISI304’ or ‘EN 1.4401 /AISI316’) and cast iron. (CMEC models were added October 2023). The pumps are supplied with Sic-Sic mechanical shaft seals and FKM or EPDM seals. Cast iron models: Maximum working pressure 10.0 bar. Cold water use only. Stainless steel models: Maximum working pressure 16.0 bar. Maximum operating temperature 60°C for self-priming models, 99°C for all other models.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2011907

Size:

1” - 2” BSP (F) or NPT inlet and outlet.

Marking:

Grundfos and Grundfos logo, type, model and technical information on adhesive label either on the terminal box or fan cover.

Installation Requirements:

R001 R415

Expiry date:

30/11/2025

Model:

CM(E)(C)1, CM(E)(C)3 and CM(E)(C)5: CM(E)(C)1, cast iron / AISI304 2 – 8 stages. CM(E)(C)3, cast iron / AISI304 2 – 8 stages. CM(E)(C)5, cast iron / AISI304 2 – 8 stages. CM(E)(C)1, AISI316 2 - 14 stages. CM(E)(C)3, AISI316 2 - 14 stages. CM(E)(C)5, AISI316 2 - 13 stages. CM(E)(C)10 CM(E)(C)15 and CM(E)(C)25: CM(E)(C)10, cast iron / AISI304 1 – 5 stages. CM(E)(C)15, cast iron / AISI304 1 – 4 stages. CM(E)(C)25, cast iron / AISI304 1 – 4 stages. CM(E)(C)10, AISI316 1 – 8 stages. CM(E)(C)15, AISI316 1 – 4 stages. CM(E)(C)25, AISI316 1 – 4 stages. Self-priming models: CM(E)1, AISI316 3 – 6 stages (S or O) CM(E)3, AISI316 3 – 6 stages (S or O) CM(E)5, AISI316 3 – 7 stages (S or O) Model key: CM/CME/CMEC X1-X2 X3 X4-X5-X6-X7-X8 X9 X10 X11 X11-X12-X13-X14 Where: CM = Centrifugal Modular. CME = Centrifugal Modular with integrated frequency converter. CMEC = Centrifugal Modular with integrated frequency converter and only core functions of the motor unit. (NOTE: CMEC models were added October 2023). X1 = Rated flow rate at 50 Hz (m³/h): 1-25. X2 = Number of impellers: 1-14. X3 = Pump Versions: A - Basic Version. E: Pumps with certificates/approvals. O: Self-priming version (maximum suction lift 8 metres). S: Self-priming version (maximum suction lift 4 metres). X4 = Pipe connection: R: Rp (ISO 7/1). S: Internal Npt thread. X5 = Material in contact with pump media: A: inlets and outlets parts EN-GJL-200, Pump shaft + Impellers and chambers EN 1.4301/AISI 304. G: Sleeve, Pump shaft + Impellers and chambers EN 1.4401/AISI 316. I: Sleeve, Pump shaft + Impellers and chambers EN 1.4301/AISI 304. X6 = Rubber parts in pump (excluding neck ring and shaft seal): E: EPDM. V: FKM. X7 = Shaft seal: A: O-ring seal with fixed driver. X8 = Material of rotating seal face: Q: Silicon Carbide (SIC). X9 = Material of stationary seal face: Q: Silicon Carbide (SIC). X10 =Material of secondary seal: E: EPDM. V: FKM. X11 = Supply voltage: B/B1/C/D/E/E1/F/G/H/I/J/O/S/T/U/V/X. X12 = Motor information: A/B/C/D/EF/G/H/I/J. X13 = Mains plug: A/B/C/D. X14 = Sensor: N: No sensor. Example: CM 10-3 A-R-I-E-A Q Q E C-A-A-N

Product Images

Approval Holder:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7, DK-8850 Bjerringbro

Phone

+45 24610542

View All Listings by this Company

Stainless steel bodied sensor with EPDM ‘O’-ring. Maximum operating temperature 90°C.

Section:

1530 Miscellaneous Fittings

Size:

½” BSP (M)

Marking:

Grundfos and Grundfos logo, part no. (P/N) and serial no. (S/N) on body.

Installation Requirements:

R001

Expiry date:

30/11/2025

Model:

VTU (model code: 99470445), Model added July 2022: VTU (model code: 92556499).

Product Images

Approval Holder:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7, DK-8850 Bjerringbro

Phone

+45 24610542

View All Listings by this Company

Range of circulating pumps, with plastic or stainless steel bodies (cast EN 1.4308 or plate EN 1.4301) and a plastic impeller. Maximum working pressure 10.0 bar (stainless steel bodied pumps), 3.0 bar (plastic bodied pumps). Maximum operating temperature 95°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2012924

Size:

Composite (plastic body) (15 models): 1” BSP (M). Stainless steel body (25 models): 1½” BSP (M).

Marking:

Grundfos and Grundfos logo, type, model, production no. and other technical info on adhesive label on end of motor housing. Flow arrow on body.

Installation Requirements:

R001 R008

Expiry date:

31/12/2025

Model:

Composite (plastic body): UPM2 15-** CIL2. Stainless steel body: UPMM 25-** N 180. UPML 25-** N 180. UPMXL 25-** 180 N. UPM GEO 25-** N 180. UPML GEO 25-** 180 N. UPMXL GEO 25-** 180 N. SOLAR PML 25-** 180 N. ** -stands for the lifting height of the pump in dm, that can be various 2 or 3 digit numbers

Product Images

Approval Holder:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7, DK-8850 Bjerringbro

Phone

+45 24610542

View All Listings by this Company

Range of single stage circulating pumps with plastic impellers and stainless steel housing, (red or black external coating, and from July 2023 a yellow external coating on the 1½" model with 130mm port length). From December 2023 the UPS25 prefix models can be supplied with EPDM inlet/outlet gaskets and the UPS32 prefix models can be supplied with fibre/NBR inlet/outlet gaskets. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C (s/steel plate EN 1.4301/1.4401 models) or 99°C (s/steel cast EN 1.4308 models).

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2012925

Size:

1¼” BSP (M) inlet/outlet (EN 1.4301 plate steel) - 150mm port length. 1½”-2” BSP (M) inlet/outlet (EN 1.4308 cast steel) - 180mm port length. DN40 flanged inlet/outlet (EN 1.4308 cast steel) - 250mm port length. Sizes added July 2023: 1¼” BSP (M) inlet/outlet (EN 1.4401 plate steel) - 150mm port length. 1¼” BSP (M) inlet/outlet (EN 1.4308 cast steel) - 150mm port length. 1½” BSP (M) inlet/outlet (EN 1.4308 cast steel) - 130mm port length.

Marking:

Grundfos, Grundfos logo, type, model, Production no., manufacturing country and other technical information on data plate on top of motor.

Installation Requirements:

R001

Expiry date:

31/12/2025

Model:

UP(S) XX-XX N XXX. UP(S) XX-XX FN XXX. Where: UP = Range name. S = Pumps equipped with electronic speed control. 1st XX = Nominal diameter (DN) of suction and discharge ports (mm) - Threaded models: 20 (1¼”), 25 (1½”) or 32 (2”). Flanged model: 40. 2nd XX = Maximum Head (dm). (no letter) or F = connection type: no letter - threaded, F - flanged. N = Pump housing - Stainless Steel. XXX = Port length (mm) - 1¼": 150, 1½": 130 or 180, 2": 180, DN40: 250.

Product Images

Approval Holder:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7, DK-8850 Bjerringbro

Phone

+45 24610542

View All Listings by this Company

Range of single stage centrifugal pumps with bronze housings or plastic housings (see model) and plastic impellers. Maximum working pressure 6.0 bar (UP(S)(O) 15-XX CES87 130 model only), 10.0 bar (all other models). Maximum operating temperature 95°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2012926

Size:

1” BSP (M) inlet/outlet.

Marking:

Grundfos, Grundfos logo, type, model, production no. and other technical information on data plate on top of motor. Flow arrow on body.

Installation Requirements:

R001 R008

Expiry date:

31/12/2025

Model:

Bronze pump housing: UP(S)(O) 15-XX B 130 (GFSxx). SOLAR 15-XX B 130 (GFSxx). Plastic (composite) pump housing: UP(S)(O) 15-XX CIL2 (GFSxx). SOLAR 15-XX CIL2 (GFSxx). UP(S)(O) 15-XX CES87 (GFSxx). Where: UP or SOLAR = Range name. S = Pumps equipped with electronic speed control. O = High efficiency pump. 15 = 1” BSP connections. XX = Maximum Head (dm). B = Pump housing - Bronze. CES87 or CIL2 = Pump housing - Composite. 130 (where noted) = Port length (mm).

Product Images

Approval Holder:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7, DK-8850 Bjerringbro

Phone

+45 24610542

View All Listings by this Company

Range of single stage end suction pumps with stainless steel or cast iron pump housings, EPDM ‘O’-rings and wear rings available in low-lead bronze/brass or stainless steel. Cast iron models are coated in black cathodic paint (textured finish) or black epoxy (smooth finish). The pumps are available with carbon graphite/silicon carbide mechanical shaft seal. Impellors are available in cast iron with black cathodic paint, low-lead bronze or stainless steel. The pumps are available with fixed flange, as well as loose flange (model dependent). Maximum working pressure 10.0 or 16.0 bar depending on model. Maximum operating temperatures: Stainless steel and cast iron with (smooth) epoxy coating pumps 85°C. Cast iron pumps with (textured) cathodic paint coating are cold water use only.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2104914

Size:

Nominal ø of suction port sizes (DN): 50, 65, 80, 100, 125, 150, 200, 250, 300, 350. Nominal ø of discharge port (DN): 32, 40, 50, 65, 80, 100, 125, 150, 200, 250,300

Marking:

Grundfos on body. Model, Pressure Max, Temperature Max, Made in Hungary and Grundfos logo on data plate.

Installation Requirements:

R001 R415

Expiry date:

30/04/2026

Model:

NB, NBE, NBG, NBGE, NK, NKE, NKG, NKGE. NB, NBE, NBG, NBGE Example codes: NBE _ - 32 -125 .1 /142 S2 X1 F 1 X2 E S BBQE. NBG 125 -100 -160 /160-142 X1 F 2 X2 E S BQQE. NK, NKE, NKG, NKGE Example codes: NKE _ - 32 -125 .1 /142 S2 X1 F 1 X2 E S BBQE. NKG 125 -100 -160 /160-142 X1 F 2 X2 E S BQQE. Where: NBE, NBG, NKE or NKG is the type range. It can also be NB, NBGE, NK or NKGE. NB, NBG, NK, NKG: Pump with standard motor. NBE, NBGE, NKE, NKGE: Pump with MGE motor. _ Nominal diameter (mm) of inlet port (DN) - not displayed on NB/NBE/NK/NKE models. For NBG/NBGE/NKG/NKGE models the value will be between 50 & 350. 32 = Nominal diameter (mm) of outlet port (DN). Value between 32 & 300. 125 = Nominal impeller diameter [mm] (dimension varies). .1 = Reduced performance. 142 = Actual impeller diameter [mm] (dimension varies). Sensor version S1 Without factory-fitted sensor, pressure sensor is supplied with the pump. S2 With factory-fitted differential-pressure sensor, Series 2000. X1: Letter or multiple letters for pump version. Pipe connection F: DIN flange. Flange pressure rating (PN - nominal pressure) 1 = 10 bar. 2 = 16 bar. X2: Materials - Pump housing/Impeller/Wear ring/Shaft denoted by a single letter. Rubber parts in pump The letter indicates material of O-ring for pump cover E: EPDM. Shaft seal arrangement S: Single seal. Code for mechanical shaft seal and shaft seal rubber parts BBQE or BQQE.

Product Images

Approval Holder:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7, DK-8850 Bjerringbro

Phone

+45 24610542

View All Listings by this Company

Pressure manager pump control unit with a plastic body. The outlet incorporates a non-return valve. Maximum working pressure 10.0 bar. Cold water use only.

Section:

1530 Miscellaneous Fittings

Size:

1” BSP (M) inlet/outlet.

Marking:

Grundfos, Grundfos logo and model on top of body. Grundfos and Grundfos logo, type, model, WRAS Approved Product logo 23°C, technical info and manufacturing country on adhesive label on side of body.

Installation Requirements:

R001

Expiry date:

31/07/2026

Model:

PM1, PM2 & PM TWIN.

Product Images

Approval Holder:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7, DK-8850 Bjerringbro

Phone

+45 24610542

View All Listings by this Company

‘Alpha’ range of circulator pumps with either a composite (plastic) or stainless steel body, plastic impellor and EPDM ‘O’-rings. The Alpha 1 model B CIL3 has a black motor housing. The Alpha 1 model B and the Alpha 2 model E stainless steel body models have either a black or red motor housing. All other models have a red motor housing. The 1”-1½” models are supplied with EPDM gaskets for the inlet and outlet. The 2” model has fibre/NBR gaskets. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2210907

Size:

Composite (CIL3) model: 1” BSP (M) inlet/outlet, Stainless steel (N) models: 1¼” BSP (M) inlet/outlet, 1½” BSP (M) inlet/outlet, 2” BSP (M) inlet/outlet.

Marking:

Grundfos, Grundfos logo and model type key on top of motor housing. Grundfos Holdings A/S, part no., serial no. and model on side of motor housing. Flow arrow on body.

Installation Requirements:

R001 R008

Expiry date:

31/10/2027

Model:

ALPHA1 **1-**2 N ***3 model B & ALPHA2 **1-**2 N ***3 model B/C/D/E. ALPHA1 **1-**2 CIL3 model B Where: **1 = size of inlet/outlet connection: 20 = 1 ¼”, 15 & 25 = 1 ½”, 32 = 2”. **2 = maximum head (dm): 40, 45, 50, 50/60, 60 & 80. N denotes stainless steel body. CIL3 denotes pump with composite (plastic body). ***3 = port to port length: 130, 150 & 180mm. (Note CIL3 model does not include a port length as it is only available in one size: 130mm). B/C/D/E indicates electronic options. For example: ALPHA2 25-50 N 130 model B. Alpha 2 pump type with 1 ½ BSP (M) inlet/outlet, 50 maximum head (dm), stainless steel pump housing and 130mm port to port length.

Product Images

Approval Holder:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7, DK-8850 Bjerringbro

Phone

+45 24610542

View All Listings by this Company

Range of differential (DPI) or relative (RPI) pressure sensors (with or without temperature transmitter) with stainless steel bodies and EPDM ‘O’-rings. The DPI2 model consists of a sensor and fitting for a capillary tube which is used for measuring the differential pressure between either sides of the sensor. Maximum working pressure 30.0 Bar. Maximum operating temperature 100°C.

Section:

1530 Miscellaneous Fittings

Size:

Sensor alone: ½” BSP (M). Sensor with adaptor: ¼" NPT (M), ½" NPT (M), ½" BSPP (M). Capillary tube (DPI2 models): ¼" BSPT (M).

Marking:

Grundfos name and logo, model, product no., version no., series no., technical information, and manufacturing country on adhesive label on body.

Installation Requirements:

R001

Expiry date:

31/12/2027

Model:

DPI2 sensor alone: AAA/B.B-BBB B/C/D/E E.EE EE/FFF DPI2 with or without accessories: AAA/B.B-BBB B/C/D/E E.EE EE/FFF/GG/HHH/IIII Product: [A] - Must be DPI Range and unit: [B] - Of no importance to wetted parts* Gen.: [C] - Must be 2 Output: [D] Of no importance to wetted parts* (+T = temperature transmitter), Cable: [E] Of no importance to wetted parts* Sealing: [F] - The first character must be E, second and third character have no importance to wetted parts Materials: [G] - Must be either -- or -B, Connection: [H] - 02N or 03P or 02B or --, Packaging: [I] - Of no importance to wetted parts*. RPI sensor alone: AAA/B.B-BBB B/C/D/E E.EE EE/FFF RPI with or without accessories: AAA/B.B-BBB B/C/D/E E.EE EE/FFF/GG/HHH/IIII Product: [A] - Must be RPI Range and unit: [B] - Of no importance to wetted parts*, Gen.: [C] - Of no importance to wetted parts*, Output: [D] - Of no importance to wetted parts* (+T = temperature transmitter), Cable: [E] - Of no importance to wetted parts*, Sealing: [F] - The first character must be E, second and third character have no importance to wetted parts, Materials: [G] - Must be either -- or -S, Connection: [H] - 02N or 03P or 02B or --, Packaging: [I] - Of no importance to wetted parts*. Code for sealing [F]: “E” = EPDM ‘O’-rings. Code for materials [G]: "B" = brass fitting, "S" = stainless steel fitting, "--" = sensor only (w/o accessory). Code for connection [H]: "02N" = 1/4" NPT, "02B" = 1/4" BSPT, "03N" = 1/2" NPT, "03P" = 1/2" BSPP, "---" = sensor only (w/o accessory). * All characters are allowed.

Product Images

Approval Holder:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7, DK-8850 Bjerringbro

Phone

+45 24610542

View All Listings by this Company

Manufacturer:

Grundfos Operations A/S

Company Name

Grundfos Operations A/S

Address

Poul Due Jensens Vej 11 DK-8850 Bjerringbro DENMARK & Birkevænget 2-10 DK-8850 Bjerringbro DENMARK

View All Listings by this Company

TP series 200 range of single stage pumps with electrocoated cast iron or bronze bodies, stainless steel impellers and EPDM ‘O’-rings. (TPE models are only available with electrocoated cast iron bodies). The products can incorporate the following shaft seal variations: BQQE (silicon carbide-silicon carbide) & BQBE (Silicon carbide-carbon). The TPE pumps are available with or without a sensor. Maximum working pressure 16.0 bar (TP and TPE40-XXX/2 and TP and TPE40 XXX/2 models). All other models 10.0 bar. Maximum operating temperature: Bronze models are 85°C, cast iron models are cold water use only.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2210908

Size:

TP(E)(D) 32: DN32 Flange (inlet/outlet), TP(E)(D) 40: DN40 Flange (inlet/outlet), TP(E)(D) 50: DN50 Flange (inlet/outlet), TP(E)(D) 65: DN65 Flange (inlet/outlet), TP(E)(D) 80: DN80 Flange (inlet/outlet) & TP(E)(D) 100: DN100 Flange (inlet/outlet).

Marking:

Grundfos and Grundfos logo on body. Grundfos and Grundfos logo, type, model, Product/Version number, technical info and manufacturing country on data plate on body.

Installation Requirements:

R001 R415

Expiry date:

31/10/2027

Model:

TP series 200 pumps: TP (E)(D) 32/40/50/65/80/100. Example Code: TP E D 40 -270 /2 S -A -F -A -BQQE -H C B Where: TP = Pump range. E = Electronically speed-controlled pump. D = Twin-head pump (optional). 40 = Nominal diameter of inlet and outlet ports (DN), 2 or 3 digits, value range 32/40/50/65/80/100. -270 = Maximum head [dm], 2 to 4 digits, value range from 30 to 390. /2 = Pole number (TP/TPE 40 models), one digit, value range 2/4. S = Code for sensor version: [Blank]: with MGE motor and without sensor, S: with factory-fitted differential-pressure sensor. A = Code for pump version. Can either be A, X, A+E, X+E. A: Basic Version, X: Special version, (+E): With certificate or test reports, the second character of the code for pump version is an "E". F = Code for pipe connection: DIN flange. A = Code for materials. Can either be A or Z. A: Basic version. Z: Bronze pump housing and motor stool. BQQE = Code for shaft seal including other plastic and rubber pump parts, except the neck ring. Can be BQQE (silicon carbide-silicon carbide) or BQBE (Silicon carbide-carbon). -H = Code for rated motor power [kW] - will be a letter or a number, please consult installation and operating instructions. C = Code for phase and voltage or other information [V] - will be a letter, please consult installation and operating instructions. B = Code for speed variant [rpm] - will be a letter or number, please consult installation and operating instructions.

Product Images

Approval Holder:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7, DK-8850 Bjerringbro

Phone

+45 24610542

View All Listings by this Company

Manufacturer:

GRUNDFOS Manufacturing Ltd.

Company Name

GRUNDFOS Manufacturing Ltd.

Address

Ipari Park Búzavirág u. 14. Tatabánya, 2800

View All Listings by this Company

CR(I)(N)(E) ranges of multistage centrifugal pumps incorporating stainless steel impellers, intermediate chamber and outer sleeve. CR(E) versions have cast iron bases and pump heads coated with black cathodic paint. CRI(E) and CRN(E) versions have stainless steel bases and pumpheads. The pumps are available with the following shaft seals HQQ*, HUU*, HUB*, HQB*, where * can be E for EPDM and V for FKM. Maximum working pressures: CR1, 3 or 5 (2-36 stages) Oval flange: 16.0 bar. CR1, 3 or 5 (2-36 stages) DIN/ANSI/JIS flange: 25.0 bar CRI/N1, 3 or 5 (2-36 stages) Flexi clamp with oval flange connection: 16.0 bar CR/I/N1, 3 or 5 (2-36 stages) DIN/ANSI/JIS flange, PJE, Flexi clamp or Triclamp: 25.0 bar CR10 (1-16 stages) Oval flange or DIN/ANSI/JIS flange: 16.0 bar. CR10 (17-22 stages) DIN/ANSI/JIS flange: 25.0 bar. CRI10 (1-16 stages) PJE, Flexi clamp, Flexi clamp with oval connection, Triclamp or DIN/ANSI/JIS flange: 16.0 bar. CRI10 (17-22 stages) PJE, Flexi clamp, Triclamp or DIN/ANSI/JIS flange: 25.0 bar CRN10 (1-22 stages) PJE, Flexi clamp, Flexi clamp with oval connection, Triclamp or DIN/ANSI/JIS flange: 25.0 bar. CR15 or 20 (1-7 stages) Oval flange: 10.0 bar. CR15 or 20 (1-10 stages) DIN/ANSI/JIS flange: 16.0 bar. CR15 or 20 (11-17 stages) DIN/ANSI/JIS flange: 25.0 bar. CRI15 or 20 (1-7 stages) Flexi clamp with oval flange connection: 10.0 bar CRI15 or 20 (1-10 stages) PJE, Flexi clamp, Triclamp or DIN/ANSI/JIS flange: 16.0 bar. CRI15 or 20 (11-17 stages) PJE, Flexi clamp, Triclamp or DIN/ANSI/JIS flange: 25.0 bar. CRN15 or 20 (1-17 stages) PJE, Flexi clamp, Flexi clamp with oval connection, Triclamp or DIN/ANSI/JIS flange: 25.0 bar. CR models: Cold water use only. CRI/CRN models: Cold water use only and from April 2023 99°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2210906

Size:

Oval flange: Rp 1” - 2”. Flexi Clamp Base: Small Base (CR/I/N1/1(s)/3/5) Ø32, Medium Base (CR/I/N15/20) Ø50. Triclamp Base Small Base (CR/I/N1/1(s)/3/5) DN32, Medium Base (CR/I/N15/20) DN50. Flange Base: Small Base (CR/I/N1/1(s)/3/5) DN25/32, Medium Base (CR/I/N15/20) DN40 and 50. PJE Base: Small Base (CR/I/N1/1(s)/3/5) DN32, Medium Base (CR/I/N15/20) DN50.

Marking:

Grundfos and Grundfos logo, type, Model, Product/Version no., technical info, temperature (WRAS 23C or WRAS 99C), manufacturing country on data plate on motor stool.

Installation Requirements:

R001 R415

Expiry date:

31/10/2027

Model:

CR(I)(N)(E) 1(s) range with 2-36 stages, CR(I)(N)(E) 3 range with 2-36 stages, CR(I)(N)(E) 5 range with 2-36 stages, CR(I)(N)(E) 10 range with 1-22 stages, CR(I)(N)(E) 15 range with 1-17 stages, CR(I)(N)(E) 20 range with 1-17 stages. Model keycode: CR(E)(C) 1/1(s)/3/5/10/15/20-A B-C-D-E-XXXE, CRI(E)(C) 1/1(s)/3/5/10/15/20-A B-C-D-E-XXXE, CRN(E)(C) 1/1(s)/3/5/10/15/20-A B-C-D-E-XXXE. Where: CR = Pump type and Cast Iron, I = EN 1.4301, N = EN 1.4401, E = Preminum Electronically Controlled Motor, C = Core (Basic) with Electronically Controlled Motor. 1/3/5/10/15/20 = Flow rate [m³/h], (s) = Reduced impeller version. A = No. of stages. B = Code for pump version: A = Basic version, B = Oversize motor, E = Pump with certificate, G = E-pump without operating panel, H = Horizontal version, I = Different pressure rating, J = E-pump with a different maximum speed, L = Pump including Grundfos CUE and certificate, N = With sensor, O = Clean and dryed, P = Undersize motor, R = Belt driven pump, V = Cascade function, X = Special version*, Z = Pump with bearing flange. C = Code for pipe connection: A = Oval flange, CA = Flexi clamp, CX = TriClamp, F = DIN flange, G = ANSI flange, J = JIS flange, N = Changed diameter of ports, P = PJE coupling (Victaulic). D = Code for materials: A = Basic version, C = Carbon-free pump, D = Carbon-graphite filled PTFE (bearings)/tungsten carbide, H = Flanges and base plate EN 1.4408, L = Motor stool, base plate and flanges EN 1.4408, N = Flanges EN 1.4408, R = Silicone carbide /silicone carbide bearing, S = PTFE neck rings, T = Baseplate EN 1.4408, X = Special*. E = Code for rubber parts: E = EPDM, V = Viton. XXX = Code for shaft seal: HQQ, HUU, HUB, HQB. [H = Balanced cartridge seal with O-ring, B = Carbon, synthetic resin-impregnated, U = Cemented tungsten carbide, Q = Silicon carbide]. *Special version ONLY covers the situation where more than 4 options are selected within the same position. This will automatically turn the 4 or more options into an X.

Product Images

Approval Holder:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7, DK-8850 Bjerringbro

Phone

+45 24610542

View All Listings by this Company

CR(N)(E) ranges of vertical multistage centrifugal pumps with stainless steel (CRN models) or black polymer coated cast iron bodies (CR models) and a stainless steel impeller. The products are available with or without a sensor. Maximum working pressure: 16.0 bar - CR(N)(E) 32 range with 1-7 stages, CR(N)(E) 45 range with 1-5 stages, CR(N)(E) 64 range with 1-5 stages. 30.0 bar - CR(N)(E) 32 range with 8-14 stages, CR(N)(E) 45 range with 6-11 stages, CR(N)(E) 64 range with 6-8 stages. 33.0 bar - CR(N)(E) 45 range with 12-13 stages. Maximum operating temperature - CR models are cold water use only. CRN models are cold water use only up to February 2nd 2023, and 99°C from February 3rd 2023.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2301900

Size:

CR/CRN 32: CR/CRN 32, 1-14 stages: DN65 and DN80 flange connection. CRN32, 1-14 stages: 3” PJE connection CR/CRN 45: CR/CRN 45, 1-13 stages: DN80 and DN100 flange connection. CRN45, 1-13 stages: 4” PJE connection. CR/CRN 64: CR/CRN 64, 1-8 stages: DN100 flange connection. CRN64, 1-8 stages: 4” PJE connection.

Marking:

Grundfos and Grundfos logo, model, type, prod/version no., technical information and manufacturing country on data plate on motor stool.

Installation Requirements:

R001 R415

Expiry date:

31/01/2028

Model:

CR/CRN(E) 32-A-B C-D-E-F-XXXX, CR/CRN(E) 45-A-B C-D-E-F-XXXX, CR/CRN(E) 64-A-B C-D-E-F-XXXX. Where: Type range: CR = Pump type and Cast Iron, N = EN 1.4401, E = Preminum Electronically Controlled Motor. 32, 45 or 64 = flow rate m³/h, A = number of impellers (CR/CRN 32 1-14, CR/CRN 45 1-13, CR/CRN 64 1-8). B = number of reduced impellers: 0, 1 or 2 on CR/CRN 32 1-7, CR/CRN 45 1-5, CR/CRN 64 1-8 models, 0 or 2 on all other models. C = Code for pump version: A = Basic version, B = Oversize motor, E = Pump with certificate, G = E-pump without operating panel, H = Horizontal version, I = Different pressure rating, J = E-pump with a different maximum speed, K = Pump with low NPSH, L = Pump including Grundfos CUE and certificate, N = With sensor, O = Clean and dryed, P = Undersize motor, R = Belt driven pump, V = Cascade function, X = Special version*, Z = Pump with bearing flange, D = Code for pipe connection: F = DIN flange, G = ANSI flange, J = JIS flange, N = Changed diameter of ports, P = PJE coupling (Victaulic). E = Code for materials: A = Basic version, C = Carbon-free pump, D = Carbon-graphite filled PTFE (bearings)/tungsten carbide, H = Flanges and base plate EN 1.4408, L = Motor stool, base plate and flanges EN 1.4408, N = Flanges EN 1.4408, R = Silicone carbide /silicone carbide bearing, S = PTFE neck rings, T = Baseplate EN 1.4408, X = Special*. F = Code for rubber parts: E = EPDM, V = Viton. XXXX = Code for shaft seal: HQQE or V / HUUE or V / HUBE or V /HQBE or V. H = Balanced cartridge seal with O-ring, B = Carbon, synthetic resin-impregnated, U = Cemented tungsten carbide, Q = Silicon carbide, E = EPDM, V = Viton. *Special version ONLY covers the situation where more than 4 options are selected within the same position. This will automatically turn the 4 or more options into an X.

Product Images

Approval Holder:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7, DK-8850 Bjerringbro

Phone

+45 24610542

View All Listings by this Company

‘UPM4’ range of circulator pumps with either a composite (plastic) or stainless-steel body, plastic impellor and EPDM ‘O’-rings. The 1”-1½” models are supplied with EPDM gaskets for the inlet and outlet. The 2” model has fibre/NBR gaskets. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2211908

Size:

Composite (CIL3) model: 1” BSP (M) inlet/outlet, Stainless steel (N) models: 1” BSP (M) inlet/outlet, 1½” BSP (M) inlet/outlet, 2” BSP (M) inlet/outlet.

Marking:

Grundfos, Grundfos logo and model type key on top of motor housing. Grundfos Holdings A/S, part no., serial no. and date of production (PC code = PC: YYWWxxx) on side of motor housing. Flow arrow on body.

Installation Requirements:

R001 R008 R415

Expiry date:

30/11/2027

Model:

UPM4/UPM4L A BBB CC-DD E EEE F GGG Where: UPM4 - pump series type - standard, UPM4L - pump series type - large (motor) version with extended P1. A = K - for condensing environments. BBB = Control variant - PWM or LIN bus. CC = Nominal diameter - 15 = G1”, 25 = G1½”, 32 = G2”. DD = Maximum head, value divided by 10 = head in m, e.g. 20 = 2.0m. Can be 20, 30, 40, 45, 50, 55, 60, 65, 70 or 75. E EEE = Pump housing and port length. N 130 and N 180 = Stainless steel and 130 or 180mm port length. CIL3PP = Composite (plastic), which is only available as 130mm port length, so no value Is mentioned. F = Control box orientation. Can be 3, 6, 9, or 12. GGG = Customer code. Can be any combination or letters and numbers.

Product Images

Approval Holder:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7, DK-8850 Bjerringbro

Phone

+45 24610542

View All Listings by this Company

‘Homebooster’ pump with stainless steel body, plastic impeller and EPDM rubber ‘O’-rings. The product is supplied with two loose brass ¾” captive nut x ½” BSP (M) connectors and fibre gaskets for installation on the inlet and outlet. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2301901

Size:

¾” BSP (M) inlet x outlet (to pump). ½” BSP (M) inlet x outlet (to optional brass connectors).

Marking:

Grundfos and Grundfos logo, type, Product no. and technical info on adhesive label on motor housing. Flow arrow on body.

Installation Requirements:

R001 R415

Expiry date:

31/01/2028

Model:

UPA 15-90 N 160 Homebooster.

Product Images

Approval Holder:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7, DK-8850 Bjerringbro

Phone

+45 24610542

View All Listings by this Company

Range of circulator pumps with brass bodies, plastic impellor, and EPDM ‘O’-rings and seals. The COMFORT 15-14 BX prefix models incorporate a screwdriver operated isolation valve on the inlet and a non-return valve at the outlet. These are housed within 1” BSP (M) x ½” BSP (M) adaptors. Maximum working pressure 10.0 Bar

Non-metallic materials and components comply with BS6920 at 95°C

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2304909

Size:

COMFORT 15-14 B prefix models: ½” BSP (F). COMFORT 15-14 BX prefix models: 1” BSP (M).

Marking:

Grundfos on body. Model on adhesive label on body. Flow arrow on the isolation valve.

Installation Requirements:

R001

Expiry date:

30/04/2028

Model:

COMFORT 15-14 B PM, COMFORT 15-14 BA PM, COMFORT 15-14 BDT PM, COMFORT 15-14 BX PM, COMFORT 15-14 BXA PM, COMFORT 15-14 BXDT PM.

Approval Holder:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7, DK-8850 Bjerringbro

Phone

+45 24610542

View All Listings by this Company

Single stage centrifugal pump, with plastic impellers. The pump is equipped with ceramic bearings; the body and shaft are made of stainless steel. The product is supplied with loose fibre/NBR inlet/outlet gaskets. Maximum working pressure 10.0 bar. Maximum operating temperature 99°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2311900

Size:

2” BSP (M) inlet/outlet

Marking:

Grundfos and Grundfos logo, type, model, production number, technical info and manufacturing country on data plate on top of motor housing. Flow arrow on body.

Installation Requirements:

R001 R415

Expiry date:

30/11/2028

Model:

UPS 32 -100 N 180

Approval Holder:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7, DK-8850 Bjerringbro

Phone

+45 24610542

View All Listings by this Company

Range of circulator pumps with stainless steel bodies and a plastic impeller. All models are available with a plastic (composite) rotor can, the MAGNA1 range is also available with a stainless-steel rotor can in the DN32 flanged, threaded 1½ & 2” sizes only. The MAGMA3 models have a differential pressure sensor. Maximum working pressure 10.0 bar. Maximum operating temperature 99°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2305910

Size:

Flanged: DN32, DN40, DN50, DN65. Threaded: 1 ½” & 2” BSP (M).

Marking:

Grundfos and Grundfos logo on motor housing. Grundfos Holdings A/S and address, type, model, Product No., Serial No., production date (YYWW), manufacturing country and other technical information on data plate on motor control box.

Installation Requirements:

R001

Expiry date:

31/05/2028

Model:

MAGNA1 XX1-XX2 N XXX3, MAGNA1 XX1-XX2 F N XXX3, MAGNA3 XX1-XX2 N XXX3, MAGNA3 XX1-XX2 F N XXX3. Where: MAGNA1 = pump type (without sensor), MAGNA3 = pump type (with differential pressure sensor). XX1 = Nominal diameter (DN) of inlet/outlet ports (mm). XX2 = Max. head (dm). Blank or F = Blank - threaded, F - Flanged connection. N = Stainless steel pump housing. XXX3 = Port to port length (mm). Full model list below: MAGNA3 32-120 F N 220, MAGNA3 40-80 F N 220, MAGNA3 40-100 F N 220, MAGNA3 40-120 F N 250, MAGNA3 40-150 F N 250, MAGNA3 40-180 F N 250, MAGNA3 50-40 F N 240, MAGNA3 50-60 F N 240, MAGNA3 50-80 F N 240, MAGNA3 50-100 F N 280, MAGNA3 50-120 F N 280, MAGNA3 50-150 F N 280, MAGNA3 50-180 F N 280, MAGNA3 65-40 F N 340, MAGNA3 65-60 F N 340, MAGNA3 65-80 F N 340, MAGNA3 65-100 F N 340, MAGNA3 65-120 F N 340, MAGNA3 65-150 F N 340, MAGNA1 25-40 N 180, MAGNA1 25-60 N 180, MAGNA1 25-80 N 180, MAGNA1 25-100 N 180, MAGNA1 25-120 N 180, MAGNA1 32-40 N 180, MAGNA1 32-60 N 180, MAGNA1 32-80 N 180, MAGNA1 32-100 N 180, MAGNA1 32-40 F N 220, MAGNA1 32-60 F N 220, MAGNA1 32-80 F N 220, MAGNA1 32-100 F N 220, MAGNA1 32-120 F N 220, MAGNA1 40-40 F N 220, MAGNA1 40-60 F N 220, MAGNA1 40-80 F N 220, MAGNA1 40-100 F N 220, MAGNA1 40-120 F N 250, MAGNA1 40-150 F N 250, MAGNA1 40-180 F N 250, MAGNA1 50-40 F N 240, MAGNA1 50-60 F N 240, MAGNA1 50-80 F N 240, MAGNA1 50-100 F N 280, MAGNA1 50-120 F N 280, MAGNA1 50-150 F N 280, MAGNA1 50-180 F N 280, MAGNA1 65-40 F N 340, MAGNA1 65-60 F N 340, MAGNA1 65-80 F N 340, MAGNA1 65-100 F N 340, MAGNA1 65-120 F N 340, MAGNA1 65-150 F N 340, MAGNA3 25-40 N 180, MAGNA3 25-60 N 180, MAGNA3 25-80 N 180, MAGNA3 25-100 N 180, MAGNA3 25-120 N 180, MAGNA3 32-40 N 180, MAGNA3 32-60 N 180, MAGNA3 32-80 N 180, MAGNA3 32-100 N 180, MAGNA3 32-40 F N 220, MAGNA3 32-60 F N 220, MAGNA3 32-80 F N 220, MAGNA3 32-100 F N 220, MAGNA3 40-40 F N 220, MAGNA3 40-60 F N 220, MAGNA1 32-120 N 180, MAGNA3 32-120 N 180.

Approval Holder:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7, DK-8850 Bjerringbro

Phone

+45 24610542

View All Listings by this Company

Range of pressure, flow and temperature sensors. The VFI sensors have stainless steel bodies, all other models have plastic bodied sensors. The MFS and VFS models are supplied with a plastic (composite) or stainless-steel flow pipe. The VFI models are supplied with a stainless-steel flow pipe. The products can also be supplied with a range of fittings/end connections (see model and size). Maximum working pressures: ITS, LPS, RPS, MFS (composite flow pipe) and VFS (composite flow pipe) models: 24.0 bar. DPS: Models with vent hole: 16.0 bar. All other models: 24.0 bar. MFS (stainless steel flow pipe) and MFS (stainless steel flow pipe): 30.0 bar. VFI non-flanged models: 30.0 bar. VFI flanged models: 30.0 bar or as per flange PN rating 16.0 bar or 25.0 bar (whichever is lower). Maximum operating temperature 99°C.

Section:

1530 Miscellaneous Fittings

Size:

ITS/LPS/RPS: BRASS CW 617N: ¼" BSPP (M). S/S EN 14408: ½" BSPT (M). ½" BSPT (M) (short). ½" NPT (M). Plastic: ⅜" BSPP (M). DPS: BRASS CW 617N: ½" BSPT (M) w/vent hole. 15.5mm w/vent hole. S/S EN 1.4401: ½" BSPT (M) w/vent hole. Housing only S/S (EN 1.4408): 2x ⅛" NPT (F). End connections for housing only: AISI 316 6mm compression, 6mm and 8mm tube. MFS, VFS (COMPOSITE FLOWPIPE): FLOWPIPE ONLY: 1”, 1¼”, 1½” BSPP (M). END CONECTIONS: BRASS CW 617N: ½", ¾" BSPP (M). ¾", 1", 1¼" BSPT (M). ½", ¾", 1", 22mm, 28mm SWEAT. S/S EN 1.4401: ¾", 1", 1¼" NPT (M). 1", 1¼" BSPT (M). MFS, VFS (S/STEEL FLOWPIPE): FLOWPIPE ONLY (EN 1.4408): ¾", 1", 1¼" BSPP (M). ¾", 1", 1¼" NPSM (M). 1" FLANGE. END CONNECTIONS: BRASS CW 617N: ½", ¾", 1" BSPT (M). ¾", 1", 22mm & 28mm SWEAT. S/S EN 1.4401: ¾", 1" BSPT (M). ¾", 1" NPT (M). VFI: CAST IRON OR S/STEEL EN 1.4408 FLANGED: DN18/25/32 (1¼"). DN40/50 (2"). DN65/80/100. S/S EN 1.4401: 1”, 1¼" BSPT (M). 1, 1¼" NPT (M).

Marking:

VFI models: Grundfos and model type (VFI) on adhesive label on sensor. Grundfos on flow pipe. All other models: Grundfos on top of sensor housing. Model type (ITS/LPS/RPS/MFS/VFS) on adhesive label on sensor.

Installation Requirements:

R001

Expiry date:

31/05/2028

Model:

ITS LPS or RPS sensor alone (only for internal sale): Sensor/ AAA/ B.B-BBB B/ C/ D/ E E.EE EE/ FFF ITS, LPS or RPS with or without accessories (saleable): AAA/ B.B-BBB B/ C/ D/ E E.EE EE/ FFF/ GG/ HHH/ IIII Product: [A] Must be ITS, LPS or RPS Range and unit: [B] Of no importance for drinking water* Gen.: [C] Of no importance for drinking water* Output: [D] Of no importance for drinking water* Cable: [E] Of no importance for drinking water* Sealing: [F] The first character must be E, second and third character have no importance for drinking water* Materials: [G] Must be either -B, -S, -I or -- Connection: [H] Must be either 03A, 03B, 03N, 02P, 10K, 16P or --- Packaging: [I] Of no importance for drinking water* ------ DPS sensor alone (only for internal sale): Sensor/ AAA/ B.B-BBB B/ C/ D/ E E.EE EE/ FFF DPS with or without accessories (saleable): AAA/ B.B-BBB B/ C/ D/ E E.EE EE/ FFF/ GG/ HHH/ IIII Product: [A] Must be DPS Range and unit: [B] Of no importance for drinking water* Gen.: [C] All characters allowed except 4 and 5 Output: [D] Of no importance for drinking water* Cable: [E] Of no importance for drinking water* Sealing: [F] The first character must be E, the second must not be A. The third character has no importance for drinking water* character have no importance for drinking water* Materials: [G] Must be either -B, -S or -- Connection: [H] Must be either 06C, 06T, 08T, 10L, 24N, 63B, 64S or --- Packaging: [I] Of no importance for drinking water* ------ MFS or VFS sensor alone (only for internal sale): Sensor/ AAA/ B.B-BBB B/ C/ D/ E E.EE EE/ FFF MFS or VFS with or without composite flow pipe accessories (saleable): AAA/ B.B-BBB B/ C/ D/ E E.EE EE/ FFF/ GG/ HHH/ IIII Product: [A] Must be MFS or VFS Range and unit: [B] Of no importance for drinking water* Gen.: [C] Of no importance for drinking water* Output: [D] Of no importance for drinking water* Cable: [E] Of no importance for drinking water* Sealing: [F] The first character must be A or E, second and third character have no importance for drinking water* Materials: [G] Must be either CB, CS or -- Connection: [H] Must be either 03P, 03S, 04B, 04N, 04P, 04S, 05B, 05N, 05P, 05S, 07B, 07N, 07P, 09P, 10K, 15K, 18K, 22S, 28S or --- Packaging: [I] Of no importance for drinking water* ------ MFS or VFS sensor alone (only for internal sale): Sensor/ AAA/ B.B-BBB B/ C/ D/ E E.EE EE/ FFF MFS or VFS with or without stainless steel flow pipe accessories (saleable): AAA/ B.B-BBB B/ C/ D/ E E.EE EE/ FFF/ GG/ HHH/ IIII Product: [A] Must be MFS or VFS Range and unit: [B] Of no importance for drinking water* Gen.: [C] Of no importance for drinking water* Output: [D] Of no importance for drinking water* Cable: [E] Of no importance for drinking water* Sealing: [F] The first character must be A or E, second and third character have no importance for drinking water* Materials: [G] Must be either QB, QS, Q- or -- Connection: [H] Must be either 03B, 04B, 04M, 04N, 04P, 04S, 05B, 05M, 05N, 05P, 05S, 07M, 07P, 10K, 10L, 102, 22S, 28S, 51G or --- Packaging: [I] Of no importance for drinking water* ------ VFI sensor alone (only for internal sale): Sensor/ AAA/ B.B-BBB B/ C/ D/ E E.EE EE/ FFF VFI with or without accessories (saleable): AAA/ B.B-BBB B/ C/ D/ E E.EE EE/ FFF/ GG/ HHH/ IIII Product: [A] Must be VFI Range and unit: [B] Of no importance for drinking water* Gen.: [C] Of no importance for drinking water* Output: [D] Of no importance for drinking water* Cable: [E] Of no importance for drinking water* Sealing: [F] The first character must be E, second and third character have no importance for drinking water* Materials: [G] Must be either S-, SG or SS Connection: [H] Must be either 05B, 05N, 07B, 07N, 30F, 31F, 32F, 33F, 35F, 37F or 42F Packaging: [I] Of no importance for drinking water* ------ Where: Code for sealing [F]: 1st character: “A” means EPDM O-rings and EPDM sealing sleeve. “E” means EPDM O-rings. Code for material [G]: 1st character: “C” means composite flow pipe. “Q” means flow insert and (except service sets) also a stainless steel flow pipe. “S” means stainless steel adapter (for DPS) or flow pipe. “-“ means no adapter (for DPS) or flow pipe. 2nd character: "B" means brass (fitting). “G” means cast iron (flange). “I” means composite (fitting). "S" - means stainless steel (fitting or flange). “-“ means no further accessories included. Code for connection (H): 1st two characters: “02” means ¼”. “03” means ½”. “04” means ¾”. “05” means 1”. “06” means 6 mm. “07” means 1¼”. “08” means 8 mm. “09” means 1½”. (Internal note - this is on a flow pipe connection) “15” means 15 mm. “16” means ⅜”. “18” means 18 mm. “22” means 22 mm. “24” means ⅛”. “28” means 28 mm. “30” means DIN PN25/40 DN18/25/32, ANSI B16.5 Class 300 - 1¼". “31” means DIN PN16/25/40 DN40, ANSI B16.5 Class 300 - 2". “32” means DIN PN16/25/40 DN50, ANSI B16.5 Class 300 - 2". “33” means ISO/DIN PN25/40 DN65. “35” means ISO/DIN PN25/40 DN80. “37” means ISO/DIN PN16 DN100. “42” means ISO/DIN PN25/40 DN100. “51” means 1" / ¾". “63” means ½" and ventilation opening. “64” means 15.5 mm and ventilation opening. “--” means no accessories included and thus implicitly the dimension of the sensor connection, which for DPS, ITS, LPS, MFS, RPS and VFS is 10 mm (of no importance for drinking water). 3rd character: “A” means BSPT (short). “B” means BSPT. “C” means Compression. “F” means flange. “K” means standard clip included (of no importance for drinking water). “L” means special clip included (of no importance for drinking water). “M” means NPSM. “N” means NPT. “P” means BSPP. “R” means union not (union nut include but no fittings included). “S” means sweat. “T” means hose connector. “2” means both standard clip and special clip included (of no importance for drinking water). “-“means no accessories included and thus implicitly the connection type of the sensor, which for DPS, ITS, LPS, MFS, RPS and VFS is a clip (of no importance for drinking water). Further details on the nomenclature: * All characters are allowed NOTE - For customer-specific numbers, GG/HHH/IIII in the saleable code is replaced by the customer name. However, the customer-specific products are still covered if they meet the requirements specified in the standard sales code.

Approval Holder:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7, DK-8850 Bjerringbro

Phone

+45 24610542

View All Listings by this Company

CMBE range of horizontal multistage centrifugal booster pumps with stainless steel bodies and impellers and EPDM ‘O’-rings. All models include an expansion vessel, non-return valve, pressure gauge and sensor on the outlet. Maximum working pressure 10.0 bar. Cold water use only.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2306903

Size:

CMBE1 & CMBE3: 1” BSPT (F) Inlet/Outlet. CMBE5: 1 ¼” BSPT (F) Inlet/1” BSPT (F) Outlet. CMBE10: 1 ½” BSPT (F) Inlet/Outlet.

Marking:

Grundfos and Grundfos logo, type, Model, P/N no. and technical info on adhesive label on end of motor housing.

Installation Requirements:

R001 R040

Expiry date:

30/06/2028

Model:

CMBE-XX1-XX2-I-U-C-X3-D-X4 Where: CMBE = Booster type - booster with integrated frequency inverter. XX1 = Rated flow rate [m³/h] @ 50Hz - 1, 3, 5 or 10. XX2 = Maximum head [m] - 44, 54, 62 or 93 (CMBE 1 = 44, CMBE 3 = 62 or 93, CMBE 5 = 62, CMBE 10 = 54). I = Materials in contact with liquid - Sleeve, Pump shaft, Impellers/chamber, 5-way valve: EN1.4301/AISI 304, Pressure manager: PP 30GF, Pressure tank: EPDM/steel/PP/Butyl. U = Supply Voltage [V] - 1 x 200-240 V, 50/60 Hz. C = Motor - High-efficiency motor with frequency converter (IP55). X3 = Main cable and plug options - A/B/C/D/E/H/G/J/O. D = Controller - Integrated frequency converter. X4 = Thread - A: Rp 1, B: Rp 1 1/4 or C: Rp 1 1/2.

Approval Holder:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7, DK-8850 Bjerringbro

Phone

+45 24610542

View All Listings by this Company

‘AQ tap’ water dispensing unit incorporating a brass solenoid and a flow sensor. The unit is operated using a smart card and credit system that allows the user to obtain a set amount of water. Maximum working pressure 3.0 bar. Cold water use only.

Section:

1530 Miscellaneous Fittings

Size:

½” BSP (M) inlet/outlet.

Marking:

Grundfos and Grundfos logo on front panel. Grundfos logo, type, model, Product no. and technical information on data plate on left hand side of cabinet.

Installation Requirements:

R001 R040

Expiry date:

30/06/2028

Model:

AQT-AA-ST-1.

Approval Holder:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7, DK-8850 Bjerringbro

Phone

+45 24610542

View All Listings by this Company