TEST SITE

Grohe AG Approvals


#2011319

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass). Incorporating ceramic cartridge headworks, and single lever operating members. The spout outlets incorporate a plastic aerator and some models are supplied with a pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2011319
Size:
Polyamide (PA) braided PEX lined hose assembly incorporating 3/8” captive nut end connections.
Marking:
Grohe on operating member.
Installation Requirements:
R001 R006 R009 R010
Expiry date:
30/11/2025
Model:
Grohe basin mixer, Eurosmart 2015: 23.456.002 32.467.002 33.188.002 32.154.002 23.372.002 32.467.20L 33.265.20L Grohe basin mixer ½’’, Eurosmart 2015 with a pop-up waste: 33.265.002 32.926.002
Product Images

Approval Holder:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg, 58675 Hemer
Phone
02372 930
General Email
info@grohe.com

View All Listings by this Company
Manufacturer:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg, 58675 Hemer
Phone
02372 930
General Email
info@grohe.com

View All Listings by this Company

Print This Approval


#2012320

Concealed WC dual flushing cistern with a vertical BS 1212-4 (2016) float operated inlet valve providing a Type AG air gap arrangement and a pneumatically operated dual flush outlet valve. The flush volume is operated by a two push button assembly for a 6 or 3 litre flush volume. The inlet supply incorporates a servicing valve. For use with cold water only. Maximum working pressure 10.0 bar.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2012320
Size:
½” BSP (M)
Marking:
Grohe logo on cistern & flush plate. 6L volume and water line on cistern. Date of manufacture (YYMM) & Grohe plant indentification on cistern and flush plate.
Installation Requirements:
R001 R556
Expiry date:
31/12/2025
Model:
38.422.10A
Product Images

Approval Holder:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg, 58675 Hemer
Phone
02372 930
General Email
info@grohe.com

View All Listings by this Company
Manufacturer:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg, 58675 Hemer
Phone
02372 930
General Email
info@grohe.com

View All Listings by this Company

Print This Approval


#2012321

Concealed WC dual flushing cistern with a vertical BS 1212-4 (2016) float operated inlet valve providing a Type AG air gap arrangement and a pneumatically operated dual flush outlet valve. The flush volume is operated by a two push button assembly for a 6 or 3 litre flush volume. The inlet supply incorporates a servicing valve. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2012321
Size:
½” BSP (M)
Marking:
Grohe logo on cistern. 6L volume and water line on cistern. Date of manufacture (YYMM) & Grohe plant indentification on cistern and flush plate.
Installation Requirements:
R001 R556
Expiry date:
31/12/2025
Model:
38.661.10A
Product Images

Approval Holder:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg, 58675 Hemer
Phone
02372 930
General Email
info@grohe.com

View All Listings by this Company
Manufacturer:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg, 58675 Hemer
Phone
02372 930
General Email
info@grohe.com

View All Listings by this Company

Print This Approval


#2105315

Range of shower outlet elbows with brass bodies (chrome plated,with exception of model 27.076.LS0). Some models incorporate a shower handset holder. The outlet incorporates a check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum operating temperature 60°C.

Section:
1530 Miscellaneous Fittings
WRAS Approval Number:
2105315
Size:
½” BSP(M)
Marking:
Grohe logo on either the body or rosette. New Models have Grohe SPA on body.
Installation Requirements:
R001 R040
Expiry date:
31/05/2026
Model:
28.405 28.406 27.707 27.704 27.057 27.076 27.076.LS0 white 28.678 28.680 New model added August 2023 26.850.XXX Where xxx denotes finish, can be replaced by: 000 – Chrome DC0 – Supersteel AL0 – Brushed hard graphite
Product Images

Approval Holder:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg, 58675 Hemer
Phone
02372 930
General Email
info@grohe.com

View All Listings by this Company
Manufacturer:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg, 58675 Hemer
Phone
02372 930
General Email
info@grohe.com

View All Listings by this Company

Print This Approval


#2109344

Range of shower handsets with plastic body (various finishes). The inlet incorporates a single check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum operating temperature 60°C.

Section:
1650 Shower Outlets
Section Subtitle:
Shower heads and shower handsets
WRAS Approval Number:
2109344
Size:
½” BSP (M)
Marking:
Grohe on body.
Installation Requirements:
R001 R040
Expiry date:
30/09/2026
Model:
27888000 27888GN0 (Brushed Cool Sunrise) 27888DC0 (SuperSteel) 27888AL0 (Brushed Hard Graphite)
Product Images

Approval Holder:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg, 58675 Hemer
Phone
02372 930
General Email
info@grohe.com

View All Listings by this Company
Manufacturer:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg, 58675 Hemer
Phone
02372 930
General Email
info@grohe.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 4 of 24

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.