Range of single hole, single outlet (swivel) combination tap assembly (chromium plated brass) incorporating a ceramic cartridge headwork with a single lever type operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2307307

Size:

Stainless steel braided PEX lind flexible hose assemblies incorporating ½” BSP (F) captive nut end connections.

Marking:

Grohe on body.

Installation Requirements:

R001 R006 R009 R010

Expiry date:

31/07/2028

Model:

31232001, 31231001, 31230001, 31233001 & 31234001.

Approval Holder:

Grohe AG

Company Name

Grohe AG

Address

Industriepark Edelburg, 58675 Hemer

Phone

02372 930

General Email

info@grohe.com

View All Listings by this Company

Manufacturer:

Grohe AG

Company Name

Grohe AG

Address

Industriepark Edelburg, 58675 Hemer

Phone

02372 930

General Email

info@grohe.com

View All Listings by this Company

Range of wall mounted, two-hole, single outlet (fixed) combination tap assembly (chrome plated brass body) incorporating a ceramic cartridge headwork with a single lever operating member and self-cancelling diverter to shower outlet. The shower outlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Section:

0530 Combination Tap Assemblies

Section Subtitle:

Two hole tap with a single outlet and a fixed spout, incorporating a self-cancelling diverter to a shower outlet.

WRAS Approval Number:

2307308

Size:

¾” BSP(M) x ½” BSP (M) Offset unions.

Marking:

Grohe on body.

Installation Requirements:

R001 R010 R030

Expiry date:

31/07/2028

Model:

33553003, 33553AL3 & 33553DC3.

Approval Holder:

Grohe AG

Company Name

Grohe AG

Address

Industriepark Edelburg, 58675 Hemer

Phone

02372 930

General Email

info@grohe.com

View All Listings by this Company

Manufacturer:

Grohe AG

Company Name

Grohe AG

Address

Industriepark Edelburg, 58675 Hemer

Phone

02372 930

General Email

info@grohe.com

View All Listings by this Company

Range of single-hole,single outlet, (swivel) combination tap assemblies (brass bodies – various finishes). Incorporoating ceramic headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10 bar. Maximum operating temperature 60°C

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2307313

Size:

Stainless-steel braided PEX lined flexible hose assemblies incorporating 3/8” BSP captive nut end connections.

Marking:

Grohe on body.

Installation Requirements:

R001 R006 R009 R010

Expiry date:

31/07/2028

Model:

31.375.xxx 30.425.xxx ‘xxx’ denotes the surface finish; 000 = Chrome DC0 = Supersteel DL0 = Brushed warm sunset DA0 = Warm sunset AL0 = Brushed hard graphite A00 = Hard graphite

Approval Holder:

Grohe AG

Company Name

Grohe AG

Address

Industriepark Edelburg, 58675 Hemer

Phone

02372 930

General Email

info@grohe.com

View All Listings by this Company

Range of single-hole, single outlet, (swivel), combination tap assemblies (chorme or supersteel plated brass bodies). Incorporating ceramic cartridge headworks with single lever operating members. The spout outlets incorporate plastic aerators. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2307316

Size:

Stainless-steel braided PEX lined flexible hose assemblies incorporating 3/8” BSP captive nut end connections.

Marking:

Grohe on operating member.

Installation Requirements:

R001 R006 R009 R010

Expiry date:

31/07/2028

Model:

31.255.000 & 31.255.DC0.

Approval Holder:

Grohe AG

Company Name

Grohe AG

Address

Industriepark Edelburg, 58675 Hemer

Phone

02372 930

General Email

info@grohe.com

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies with brass bodies (chromium plated), incorporating ceramic cartridge headworks, a single lever operating member and a plastic aerator. The products are supplied with either a lever type pop up waste or a click type waste. Maximum operating pressure 10.0 bar. Maximum working temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2307341

Size:

Stainless steel braided, pex lined flexible hose assembly with 3/8” BSP (F) captive nut.

Marking:

Grohe on operating member.

Installation Requirements:

R001 R006 R009 R010

Expiry date:

31/07/2028

Model:

33265003 (POP-UP WASTE), 32467003 (POP-UP WASTE) & 23922003 (CLICK WASTE).

Approval Holder:

Grohe AG

Company Name

Grohe AG

Address

Industriepark Edelburg, 58675 Hemer

Phone

02372 930

General Email

info@grohe.com

View All Listings by this Company

Manufacturer:

Grohe AG

Company Name

Grohe AG

Address

Industriepark Edelburg, 58675 Hemer

Phone

02372 930

General Email

info@grohe.com

View All Listings by this Company