TEST SITE

Flexcrete Technologies Ltd. Approvals


#2010510

‘Intercrete 4820’. Site applied, grey coloured waterproof mortar. Mix Intercrete 4820 & water in a mass ratio of 8.33:1. Cure for 21 days@7°C. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:
5042 Coatings, Paints & Linings
Section Subtitle:
Site applied pipe and fittings coatings. Compliance with BS6920 relates to the conditions of cure specified in the listing. If the cure conditions are varied from those described below then compliance with BS6920 cannot be assummed without further testing. Where catalysts are required, only tested catalysts in the recommended concentrations should be used. Manufacturer's advice must be sought if any non standard mixing or curing conditions are being considered.
WRAS Approval Number:
2010510
Expiry date:
31/10/2025

Approval Holder:
Flexcrete Technologies Ltd.
Company Name
Flexcrete Technologies Ltd.
Address
Tomlinson Road, Leyland, Lancashire
Postcode
PR25 2DY
Phone
0845 2607005
General Email
Info@flexcrete.com

View All Listings by this Company

Print This Approval


#2010511

‘Monomix’. Site applied, grey coloured waterproofing mortar. Mix 'Monomix' and water in a 7.58:1 mass ratio. Cure for 21 days@7°C. For use with water up to 23°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mix and/or cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:
5308 Repair Material
Expiry date:
31/10/2025

Approval Holder:
Flexcrete Technologies Ltd.
Company Name
Flexcrete Technologies Ltd.
Address
Tomlinson Road, Leyland, Lancashire
Postcode
PR25 2DY
Phone
0845 2607005
General Email
Info@flexcrete.com

View All Listings by this Company

Print This Approval


#2101524

'Fastfill'. Site applied, grey coloured cementitous mortar. Mix Fastfill and water in a 7.14:1 mass ratio. Cure for 21 days@7°C. For use with water up to 23°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mix and/or cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:
5055 Concrete, Cement and Mortar
Section Subtitle:
Waterproofers.
WRAS Approval Number:
2101524
Expiry date:
31/01/2026

Approval Holder:
Flexcrete Technologies Ltd.
Company Name
Flexcrete Technologies Ltd.
Address
Tomlinson Road, Leyland, Lancashire
Postcode
PR25 2DY
Phone
0845 2607005
General Email
Info@flexcrete.com

View All Listings by this Company

Print This Approval


#2102517

'Intercrete 4807'. Site applied, grey coloured cementitious repair mortar. Mix 'Intercrete 4807' and water in a mass ratio of 9.4:1 Cure for 21 days@7°C. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:
5063 Concrete, Cement and Mortar
Section Subtitle:
Repair materials. High humidity of 80% to 95% is required when curing cementitious materials.
WRAS Approval Number:
2102517
Expiry date:
28/02/2026

Approval Holder:
Flexcrete Technologies Ltd.
Company Name
Flexcrete Technologies Ltd.
Address
Tomlinson Road, Leyland, Lancashire
Postcode
PR25 2DY
Phone
0845 2607005
General Email
Info@flexcrete.com

View All Listings by this Company

Print This Approval


#2104536

'Monomix'. Site applied, grey coloured cementitious repair mortar. Mix Monomix and water in a mass ratio of 7.58:1. Cure for 21 days@7°C. For use with water up to 23°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mixing and/or curing conditions are varied from those specified on the approval then the materials are not covered by the scope of the approval.

Section:
5308 Repair Material
Expiry date:
30/04/2026

Approval Holder:
Flexcrete Technologies Ltd.
Company Name
Flexcrete Technologies Ltd.
Address
Tomlinson Road, Leyland, Lancashire
Postcode
PR25 2DY
Phone
0845 2607005
General Email
Info@flexcrete.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 1 of 2

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.