Two-hole, single outlet, fixed, combination tap assembly, (chrome plated brass body), incorporating quarter turn ceramic disc headworks with single lever operating members. The products are supplied with metal back nuts. Maximum working pressure 10.0 Bar

Non-metallic materials and components comply with BS6920 at 65°C

Section:

0510 Combination Tap Assemblies

Section Subtitle:

Two hole tap with a single outlet and a fixed spout.

WRAS Approval Number:

2305901

Size:

3/4" BSP (M)

Marking:

Bristan on body.

Installation Requirements:

R001 R006 R010

Expiry date:

31/05/2028

Model:

GLD2 BF C

Product Images

Approval Holder:

Bristan Group Limited

Company Name

Bristan Group Limited

Address

Birch Coppice Business Park Pooley Hall Drive Dordon Tamworth. Staffordshire

Postcode

B78 1SG

Phone

01827 254144

General Email

enquire@bristan.com

View All Listings by this Company

Single-hole, single outlet, (swivel), combination tap assembly, (chrome plated brass body) incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic flow straightener. The inlets incorporate screwdriver operated isolation valves incorporating approved single check valve cartridges (however, the complete product has not been fully tested to demonstrate that it provides backflow protection). Maximum working pressure 10.0 Bar

Non-metallic materials and components comply with BS6920 at 65°C

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2307900

Size:

Stainless steel braided EPDM lined flexible hose assemblies with ½” BSP captive nut end connections x 15mm compression.

Marking:

Bristan on operating member.

Installation Requirements:

R001 R006 R010

Expiry date:

31/07/2028

Model:

PM SNK C

Product Images

Approval Holder:

Bristan Group Limited

Company Name

Bristan Group Limited

Address

Birch Coppice Business Park Pooley Hall Drive Dordon Tamworth. Staffordshire

Postcode

B78 1SG

Phone

01827 254144

General Email

enquire@bristan.com

View All Listings by this Company

Range of single-hole, single outlet, fixed combination tap assemblies (chrome plated brass bodies), incorporating ceramic cartridge headworks with single lever operating members. The spout outlet incorporates a plastic flow straightener. The product is supplied with a metal back nut. Maximum working pressure 10.0 Bar

Non-metallic materials and components comply with BS6920 at 60°C

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2305903

Size:

Stainless-steel braided EPDM lined flexible hose assemblies with 15mm compression end connections.

Marking:

Bristan on body.

Installation Requirements:

R001 R006 R010

Expiry date:

31/05/2028

Model:

NR TBAS C 257586

Approval Holder:

Bristan Group Limited

Company Name

Bristan Group Limited

Address

Birch Coppice Business Park Pooley Hall Drive Dordon Tamworth. Staffordshire

Postcode

B78 1SG

Phone

01827 254144

General Email

enquire@bristan.com

View All Listings by this Company

Range of pillar taps (chrome plated brass bodies) incorporating quarter turn ceramic disc headworks with cross top operating members. The products are supplied with metal back nuts. Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

1800 Taps

Section Subtitle:

Pillar tap.

WRAS Approval Number:

2305904

Size:

1/2" BSP (M)

Marking:

Heritage Bathrooms on indice.

Installation Requirements:

R001 R006

Expiry date:

31/05/2028

Model:

THRC00 & BQHB00C

Product Images

Approval Holder:

Bristan Group Limited

Company Name

Bristan Group Limited

Address

Birch Coppice Business Park Pooley Hall Drive Dordon Tamworth. Staffordshire

Postcode

B78 1SG

Phone

01827 254144

General Email

enquire@bristan.com

View All Listings by this Company

Range of pillar taps (chrome plated brass bodies) incorporating quarter turn ceramic disc headworks with cross top operating members. The product is supplied with metal back nuts. Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

1800 Taps

Section Subtitle:

Pillar tap.

WRAS Approval Number:

2305905

Size:

3/4" BSP (M)

Marking:

Heritage Bathrooms on Indice.

Installation Requirements:

R001 R005

Expiry date:

31/05/2028

Model:

THRC01 & BQHB01C

Product Images

Approval Holder:

Bristan Group Limited

Company Name

Bristan Group Limited

Address

Birch Coppice Business Park Pooley Hall Drive Dordon Tamworth. Staffordshire

Postcode

B78 1SG

Phone

01827 254144

General Email

enquire@bristan.com

View All Listings by this Company