TEST SITE

Bristan Group Limited Approvals

#2110043

Two hole, single outlet, fixed combination tap assembly (chromium plated brass) incorporating quarter turn ceramic disc headworks with single lever operating members and a manual diverter to shower outlet. The spout outlet incorporates a plastic flow straightener. The product is supplied with a shower hose, shower handset and metal backnuts, Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0520 Combination Tap Assemblies
Section Subtitle:
Two hole tap with a single outlet and a fixed spout, incorporating a manually operated diverter to a shower outlet.
WRAS Approval Number:
2110043
Size:
¾” BSP (M).
Marking:
Cascade (brand of Bristan) on operating members.
Installation Requirements:
R001 R006 R020
Expiry date:
31/10/2026
Model:
0062.21913.3 - Edge Bath Shower Mixer
Product Images
Approval Holder:
Bristan Group Limited
Company Name
Bristan Group Limited
Address
Birch Coppice Business Park Pooley Hall Drive Dordon Tamworth. Staffordshire
Postcode
B78 1SG
Phone
01827 254144
General Email
enquire@bristan.com

View All Listings by this Company

Print This Approval

#2110900

Single hole, single outlet fixed combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Product supplied with an approved click-type pop up waste. Maximum operating pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2110900
Marking:
Bristan on the operating member.
Installation Requirements:
R001 R006 R010
Expiry date:
31/10/2026
Model:
J BAS C
Product Images
Approval Holder:
Bristan Group Limited
Company Name
Bristan Group Limited
Address
Birch Coppice Business Park Pooley Hall Drive Dordon Tamworth. Staffordshire
Postcode
B78 1SG
Phone
01827 254144
General Email
enquire@bristan.com

View All Listings by this Company

Print This Approval

#2111900

Single hole, single outlet fixed combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic flow straightener. The product is supplied with a click type pop-up waste. Maximum operating pressure 10.0 bar. Maximum operating temperature 60°C

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2111900
Size:
Stainless steel braided EPDM lined flexible hose assemblies with ½” BSP captive nut end connections.
Marking:
Bristan on the operating member
Installation Requirements:
R001 R006 R010
Expiry date:
30/11/2026
Model:
BRT SQU SMBAS C
Product Images
Approval Holder:
Bristan Group Limited
Company Name
Bristan Group Limited
Address
Birch Coppice Business Park Pooley Hall Drive Dordon Tamworth. Staffordshire
Postcode
B78 1SG
Phone
01827 254144
General Email
enquire@bristan.com

View All Listings by this Company

Print This Approval

#2111901

Two-hole, single outlet fixed combination tap assembly (chromium plated brass) incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a stainless steel strainer with a plastic flow straightener. The product is supplied with metal back nuts. The inlets incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole tap with a single outlet and a fixed spout.
WRAS Approval Number:
2111901
Size:
¾” BSP (M)
Marking:
Bristan logo on operating member
Installation Requirements:
R001 R005 R010
Expiry date:
30/11/2026
Model:
J BF C
Product Images
Approval Holder:
Bristan Group Limited
Company Name
Bristan Group Limited
Address
Birch Coppice Business Park Pooley Hall Drive Dordon Tamworth. Staffordshire
Postcode
B78 1SG
Phone
01827 254144
General Email
enquire@bristan.com

View All Listings by this Company

Print This Approval

#2111902

Range of single hole, single outlet fixed combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum operating pressure 10.0 bar. Maximum operating temperature 60°C

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2111902
Size:
Stainless steel braided EPDM lined flexible hoses assemblies with ½” BSP captive nut end connections.
Marking:
Bristan on operating member
Installation Requirements:
R001 R006 R010
Expiry date:
30/11/2026
Model:
SM SMBAS C & OR SMBAS C
Product Images
Approval Holder:
Bristan Group Limited
Company Name
Bristan Group Limited
Address
Birch Coppice Business Park Pooley Hall Drive Dordon Tamworth. Staffordshire
Postcode
B78 1SG
Phone
01827 254144
General Email
enquire@bristan.com

View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page 23 of 63

© WRAS 2025 | Update Cookie Consent

Site Developed By Duo

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.